Moog Music Forum

Share Ideas and Pass the word

Moving parameters after switching between preset

Everything Phatty.

Moving parameters after switching between preset

Postby martijn106 » Fri Oct 26, 2018 11:41 am

Dear Moog enthusiast,

Recently i have bought a Moog LP Stage 2 and i have encountered the following problem.

When i browse from one preset to another and start playing, the filter parameter (and sometimes others) will slowly change to where the fysical pointer is at on that moment. So for instance i play on preset 80 with the filter pointer fysicaly set on 3:00. Then i switch to preset 81 where i saved a sound with the filter on 9:00. In preset 81 the fysical pointer of the filter is still on 3:00, but the filter light and sound will slowly move up from 9:00 to 3:00.

Forgive me if there is already a topic on this. Help is much appreciated!

Firmware: 3.21S 690
martijn106
 
Posts: 1
Joined: Fri Oct 26, 2018 10:26 am

Re: Moving parameters after switching between preset

Postby electronicpoison » Sat Oct 27, 2018 4:27 pm

hai ,i have the same probs few weeks ago. look for a tread .dancing leds "
it is disapear in me case after i take a different socket. i hope it helps if not ask again .
sorry for me bad english
electronicpoison
 
Posts: 63
Joined: Thu Feb 10, 2011 6:24 pm
Location: Hamburg


Return to Little Phatty & Slim Phatty Forum

Who is online

Users browsing this forum: CommonCrawl [Bot], Trendiction [Bot], Yandex [Bot] and 1 guest