YES!
-
- Posts: 126
- Joined: Mon Apr 22, 2013 3:12 pm
YES!
Sub P. editor is in the hizzy.
Last edited by CleverConQueso on Fri Sep 13, 2013 5:06 pm, edited 1 time in total.
-
- Posts: 5
- Joined: Sat Aug 24, 2013 9:33 pm
Re: YES!
How do you have yours setup? Mine's telling me that the hardware is disconnected, and it also keeps crashing and force quiting. =/
-
- Posts: 126
- Joined: Mon Apr 22, 2013 3:12 pm
Re: YES!
Windows 7/32. USB. Using the stand-alone. No trouble to report although I'm still sorting out how it works. The 'prefs' button is right-side, about halfway down and has the MIDI communication settings.
-
- Posts: 105
- Joined: Sun Sep 08, 2013 9:53 am
- Location: Paris
- Contact:
Re: YES!
Hi there,
Big trouble with the editor on my unit.
I can load or save patches with the Standalone editor (W7/64 bits) but no communications between the knobs on the editor and my Sub Phatty, it doesn't work.
I checked the prefs and everything is ok but if i turn any knob on the editor, i have absolutely nothing on the SP. Any help? Thanks in advance.
Big trouble with the editor on my unit.
I can load or save patches with the Standalone editor (W7/64 bits) but no communications between the knobs on the editor and my Sub Phatty, it doesn't work.
I checked the prefs and everything is ok but if i turn any knob on the editor, i have absolutely nothing on the SP. Any help? Thanks in advance.
-
- Posts: 16
- Joined: Thu Sep 05, 2013 12:47 am
Re: YES!
I'm excited to use this, too, but it keeps quitting before I can. Anyone else on MAC using OS 10.6.8 successful in using the editor? I am able to choose the sub phatty in the MIDI in and out in the editor prefs. After a second, it crashes and quits. Maybe there's a fix someone has thought of already?memhpis1212 wrote:How do you have yours setup? Mine's telling me that the hardware is disconnected, and it also keeps crashing and force quiting. =/
-
- Posts: 126
- Joined: Mon Apr 22, 2013 3:12 pm
Re: YES!
I'm the same but honestly, I don't know how it's supposed to work. From my experience with DSI stuff, I'm used to the knobs not turning in both places except when the wind's right. What I've been doing is downloading the patch from the Sub Phatty, tweaking, saving, then sending it back up. I'm assuming in a perfect world the two devices will be more interactive but in the meantime, getting the whole scene at a glance is a step up for me. I haven't tried it as a VST yet which I imagine would have to be more interactive but not my use case.gencomprodukts wrote:...everything is ok but if i turn any knob on the editor, i have absolutely nothing on the SP.
-
- Posts: 105
- Joined: Sun Sep 08, 2013 9:53 am
- Location: Paris
- Contact:
Re: YES!
I finaly found the solution, now it works!I'm the same but honestly, I don't know how it's supposed to work
Choose Midi Channel 1.
My unit had Channel 2 and it seems that the Standalone editor ONLY works with Channel 1.
MOOG Memorymoog+, Sub 37, CP251, ROLAND SH-1, SH-2, SH-7, SH101, Juno 60, SVC350, TR808, SCI Prophet 5 Rev.3.1, KORG Mono/poly, KR55, OBERHEIM SEM, WALDORF Microwave 1, DSI Prophet 08 Desktop PE, BOSS DR-55, BassBot TT303, AKAI MPC1000 JJOS2XL.
Re: YES!
i am using windows 7 64 bits and when i use the editor in stand alone it is working perfectly but i got a problems when i try to use it in vst version ,the preferences are not kept and of course the editor vst is useless .i am trying to figure out what is wrong.any help is welcome.
Re: YES!
I had the same problem until I started the editor when the Sub Phatty was already turned on and connected. You may try thatgencomprodukts wrote:Hi there,
Big trouble with the editor on my unit.
I can load or save patches with the Standalone editor (W7/64 bits) but no communications between the knobs on the editor and my Sub Phatty, it doesn't work.
I checked the prefs and everything is ok but if i turn any knob on the editor, i have absolutely nothing on the SP. Any help? Thanks in advance.
Re: YES!
Many problems here also. I keep getting a "hardware disconnected" message at the left side of the prefs screen (Firmware: ...) randomly.
The system is running on Windows 7/64, so I have to disconnect my Subphatty from the DAW's midi in and outs and only use the editor's Midi i/o instead. But then I can neither give record any note- midi messages from the DAW nor record any playable automation! Amos, please help!!
The system is running on Windows 7/64, so I have to disconnect my Subphatty from the DAW's midi in and outs and only use the editor's Midi i/o instead. But then I can neither give record any note- midi messages from the DAW nor record any playable automation! Amos, please help!!
-
- Posts: 105
- Joined: Sun Sep 08, 2013 9:53 am
- Location: Paris
- Contact:
Re: YES!
Thanks Rob but as i said i finaly found the solution. My SB had Midi Channel 2 and the Standalone editor ONLY works with Channel 1. Pretty weird... There is no communications between the knobs & the Standalone editor if the unit is not configured to receive on Channel 1.I had the same problem until I started the editor when the Sub Phatty was already turned on and connected. You may try that
Would be great to correct this in the future.
MOOG Memorymoog+, Sub 37, CP251, ROLAND SH-1, SH-2, SH-7, SH101, Juno 60, SVC350, TR808, SCI Prophet 5 Rev.3.1, KORG Mono/poly, KR55, OBERHEIM SEM, WALDORF Microwave 1, DSI Prophet 08 Desktop PE, BOSS DR-55, BassBot TT303, AKAI MPC1000 JJOS2XL.
Re: YES!
Maybe you didn't set the Editor to use Channel 2 in the Prefs, at first? I am using the Standalone editor with my Sub Phatty on Channel 2, no problem. Just had to set MIDI In/Out to 2 in the editor preferences page and it's working fine, for me. Win7/x64gencomprodukts wrote:There is no communications between the knobs & the Standalone editor if the unit is not configured to receive on Channel 1.