Theremin only high frecuencies

Share your theremin experience: tips, tricks, techniques, favorite theremin moments.
Post Reply
Pak
Posts: 1
Joined: Wed Oct 05, 2011 9:42 pm

Theremin only high frecuencies

Post by Pak » Wed Oct 05, 2011 9:55 pm

Ok mi theremin (standard) use to work fine after a lona trip 2600 km on a jeep without suspensión, is not longer calibrate and only hear the very high frecuencies not low frecuencies at all, i dont have an stand meaby that is The problem. What do you think theremin users?

JimF
Posts: 41
Joined: Fri Dec 04, 2009 1:18 pm

Re: Theremin only high frecuencies

Post by JimF » Sun Oct 09, 2011 1:09 pm

Most likely that one of the coils in the pitch antenna circuit has gone open circuit. If not this, then an open circuit to one of these coils on the printed circuit board. This happened to my EWPro once several years ago, Rudi fixed it in (under warranty)about 10 seconds (I live in Germany), but only by sacrificing a coil from a "spare" EWPro that he had in the workshop.

Good luck...

Jim F.

Post Reply