Plug in here for info tips and strategies for your Moogerfooger Analog Effects. Connect more than one for plenty of fun!
-
damu22
- Posts: 4
- Joined: Thu Feb 26, 2009 11:04 pm
Post
by damu22 » Sun Aug 23, 2009 2:05 pm
Hi, I purchased a brand new ep-2 pedal and it doesnt seem to work. maybe the unit was bought damaged or i can't use it. But when I insert the plug into my freq box I don't hear anything changing while my foot is on the pedal. Anyone know anything I can do?? Thankts
-
toryjames
- Posts: 155
- Joined: Tue Jan 16, 2007 4:21 am
- Location: California
-
Contact:
Post
by toryjames » Sun Aug 23, 2009 2:18 pm
Did you try adjusting the output level control knob underneath the foot rocker? It sounds like the range might be turned all the way down.
-
patobrujo
- Posts: 135
- Joined: Tue May 27, 2008 3:17 pm
- Location: Santiasko, Chile
Post
by patobrujo » Mon Aug 24, 2009 9:47 am
another possibility is that you have a cv connected to the pedal usin a mono cable, if you don't use a TRS cable for the cv's the power for the EP is not available in the cv outs...
Please correct me if am wrong
..::PATOBRUJO::..