104SD - High pitch whine after .6 on long setting.

Plug in here for info tips and strategies for your Moogerfooger Analog Effects. Connect more than one for plenty of fun!
Post Reply
theAKK
Posts: 3
Joined: Wed Jan 02, 2019 5:40 pm

104SD - High pitch whine after .6 on long setting.

Post by theAKK » Wed Jan 02, 2019 8:12 pm

Once I go past the .6 on the long setting I get a high pitch whine that will engage change pitch with delay time and then disengage when I go below .6. Upon bypass the high pitch is still present but significantly reduced in volume. Provided a video to illustrate issue: https://www.youtube.com/watch?v=xAStk3KThAc

Opened up, cleaned up and checked seating of chips and tried to check daughterboard where everything looks ok. See pictures in case I'm missing anything as I am no tech, just a hobbyist.

Would appreciate any help as I bought it like this so maybe something happened on transit. Thanks for reading.
Attachments
mother
mother
daughter
daughter

theAKK
Posts: 3
Joined: Wed Jan 02, 2019 5:40 pm

Re: 104SD - High pitch whine after .6 on long setting.

Post by theAKK » Sat Jan 05, 2019 1:59 pm

Finally finessed the daughterboard free and only noticed 2 more MN3008 chips. So 4 total. Is that correct?
Attachments
IMG_4735.jpg

Post Reply