Page 1 of 1

MF102 Set-Up With Mic

Posted: Sat Feb 10, 2018 4:49 pm
by nicksonic
Hi, just bought a MF102 to use primarily with a mic but i'm having trouble getting anything out of it.

My set-up is as follows -

This mic - https://www.amazon.co.uk/Behringer-XM85 ... ger+XM8500 - connected to the MF102 audio in via an xlr to 1/4" cable, then the MF102 audio out connected to a pair of active speakers via a 1/4" to phono cable.

I'm probably missing something and this post - viewtopic.php?t=8390 - seems to suggest I may need a mixer between the mic and the MF102. Can anyone provide any guidance...?

Cheers,

Nick

Re: MF102 Set-Up With Mic

Posted: Sun Feb 11, 2018 3:12 pm
by JimF
MF102 wants a line level input signal. Put your mic through a preamp, small mixer etc (with phantom power if the mic needs it), from there into MF102. I use this kind of setup a lot with shakuhachi going into the ringmod.

Jim F.