MF102 Set-Up With Mic

Plug in here for info tips and strategies for your Moogerfooger Analog Effects. Connect more than one for plenty of fun!
Post Reply
Posts: 1
Joined: Sat Feb 10, 2018 4:36 pm

MF102 Set-Up With Mic

Post by nicksonic » Sat Feb 10, 2018 4:49 pm

Hi, just bought a MF102 to use primarily with a mic but i'm having trouble getting anything out of it.

My set-up is as follows -

This mic - ... ger+XM8500 - connected to the MF102 audio in via an xlr to 1/4" cable, then the MF102 audio out connected to a pair of active speakers via a 1/4" to phono cable.

I'm probably missing something and this post - - seems to suggest I may need a mixer between the mic and the MF102. Can anyone provide any guidance...?



Posts: 25
Joined: Fri Dec 04, 2009 1:18 pm

Re: MF102 Set-Up With Mic

Post by JimF » Sun Feb 11, 2018 3:12 pm

MF102 wants a line level input signal. Put your mic through a preamp, small mixer etc (with phantom power if the mic needs it), from there into MF102. I use this kind of setup a lot with shakuhachi going into the ringmod.

Jim F.

Post Reply