Hello folks,
I have a Moogerfooger MF-104M bought new back in 2012.
I use it in the effects loop of my guitar amps and everything always worked fine, apart from the Mix control.
The problem is I never can pass 9 o'clock with it, otherwise the signal gets overwhelmingly wet.
At first I thought this would be how the thing is, but looking at demonstration videos, I noticed that people go way over this point although still keeping a good wet/dry balance.
Does anyone have experienced this issue? Any simple fix?
Best!
MF-104M issue on Mix control
-
aledenadai
- Posts: 1
- Joined: Wed Jul 05, 2017 2:15 am
- Location: Toulouse, France
Re: MF-104M issue on Mix control
Make sure you have the latest firmware, do a calibration and it might get back to normal:
https://www.moogmusic.com/products/moog ... nloads-tab
https://www.moogmusic.com/products/moog ... nloads-tab
http://audiotecna.info
T-III, Voyager, VX-351, Slim Phatty, Model D, Sub Phatty, Subsequent 37, Minitaur, all moogerfoogers and minifoogers, EW+, Theremini, Model 15, Filtatron, Animoog, Model D App, iOS 11 Mother-32, DFAM, Werkstatt, Win7, High Sierra
T-III, Voyager, VX-351, Slim Phatty, Model D, Sub Phatty, Subsequent 37, Minitaur, all moogerfoogers and minifoogers, EW+, Theremini, Model 15, Filtatron, Animoog, Model D App, iOS 11 Mother-32, DFAM, Werkstatt, Win7, High Sierra
-
stiiiiiiive
- Posts: 2544
- Joined: Tue Aug 30, 2011 2:58 pm
- Contact:
Re: MF-104M issue on Mix control
What do you mean by calibration?bichuelo wrote:Make sure you have the latest firmware, do a calibration and it might get back to normal:
https://www.moogmusic.com/products/moog ... nloads-tab
Toxic Overdrive | Minkovski | DNOT | Maetherial | Folie à 6
Re: MF-104M issue on Mix control
There is a calibration procedure for the knobs on the MF104M.stiiiiiiive wrote:What do you mean by calibration?bichuelo wrote:Make sure you have the latest firmware, do a calibration and it might get back to normal:
https://www.moogmusic.com/products/moog ... nloads-tab
However, I now see that the instructions for this are not at Moog's site. I think you should write to tech support and ask them for this document, since I am not authorized to share it
http://audiotecna.info
T-III, Voyager, VX-351, Slim Phatty, Model D, Sub Phatty, Subsequent 37, Minitaur, all moogerfoogers and minifoogers, EW+, Theremini, Model 15, Filtatron, Animoog, Model D App, iOS 11 Mother-32, DFAM, Werkstatt, Win7, High Sierra
T-III, Voyager, VX-351, Slim Phatty, Model D, Sub Phatty, Subsequent 37, Minitaur, all moogerfoogers and minifoogers, EW+, Theremini, Model 15, Filtatron, Animoog, Model D App, iOS 11 Mother-32, DFAM, Werkstatt, Win7, High Sierra
Re: MF-104M issue on Mix control
Well, they had shared a beta which includes the calibration procedure some time ago: viewtopic.php?f=3&t=22060#p133604
http://audiotecna.info
T-III, Voyager, VX-351, Slim Phatty, Model D, Sub Phatty, Subsequent 37, Minitaur, all moogerfoogers and minifoogers, EW+, Theremini, Model 15, Filtatron, Animoog, Model D App, iOS 11 Mother-32, DFAM, Werkstatt, Win7, High Sierra
T-III, Voyager, VX-351, Slim Phatty, Model D, Sub Phatty, Subsequent 37, Minitaur, all moogerfoogers and minifoogers, EW+, Theremini, Model 15, Filtatron, Animoog, Model D App, iOS 11 Mother-32, DFAM, Werkstatt, Win7, High Sierra
Re: MF-104M issue on Mix control
The installation instructions for v1.1.3 firmware downloadable on Moog's support page include the knob calibration routine.
https://www.moogmusic.com/sites/default ... v1.1.3.zip
https://www.moogmusic.com/sites/default ... v1.1.3.zip
Moog stuff: Slim Phatty, Minitaur, Mother-32, Werkstatt x2, MF-103, MF-104M, MF-108M
Running Moog software on Win7 64-bit
Dreams of a Voyager XL some day...
Running Moog software on Win7 64-bit
Dreams of a Voyager XL some day...