MF 104m firmware update issue

Plug in here for info tips and strategies for your Moogerfooger Analog Effects. Connect more than one for plenty of fun!
Post Reply
jonpatch
Posts: 1
Joined: Thu Jan 12, 2017 10:02 pm

MF 104m firmware update issue

Post by jonpatch » Thu Jan 12, 2017 10:12 pm

Anyone been able to remove firmware from a 104m via sysex but unable to add the updated firmware successfully? My spaceship is grounded!

Whenever I try to send the 1.1.3 firmware, the light on my MF just goes solid red and stays that way. Powering off and on again brings it back to bootloader mode.
Top
Laznikoff
Posts: 7
Joined: Thu Mar 05, 2015 7:57 am

Re: MF 104m firmware update issue

Post by Laznikoff » Mon Mar 12, 2018 11:23 am

i have the same!! did you find a solution? plz :D
Top
Laznikoff
Posts: 7
Joined: Thu Mar 05, 2015 7:57 am

Re: MF 104m firmware update issue

Post by Laznikoff » Mon Mar 12, 2018 11:42 am

i fixed it!

i tweakt the low level output buffers,. for me the recomended value's by Moog's design didnt work.

i changed it to size 256, num 128
with these settings i succesfully updated my mf104 to v1.1.3!
Top
Post Reply

Return to “Moogerfooger Forum”