Hello!
I have a very worrying issue with the BassMurf. I plugged the output of an old organ into the Murf and it looks like the pedal is out of order now. Maybe I ride the input too hot?
All 3 LEDs light yellow, nothing changes after disconnecting the PSU. It is stuck in this state.
What is this??
And even worse: I just borrowed it from a friend today, played around with it for a couple of minutes and now this! Oh my...
It would be very kind if you guys could help me with this issue.
What could it be?
What can I do?
Cheers,
Seb
Help please!! BassMurf broken? all 3 LEDS light yellow
-
- Posts: 2
- Joined: Mon Feb 15, 2016 3:05 pm
- latigid on
- Posts: 1579
- Joined: Mon Jan 30, 2006 3:47 pm
- Location: Auckland, New Zealand
Re: Help please!! BassMurf broken? all 3 LEDS light yellow
Happened to me about 10 years ago:
http://forum.moogmusic.com/viewtopic.ph ... 72&p=19181
The CPU is stuffed it seems, sorry about that. You'll have to send it to Moog for fixing, assuming they still have replacement parts because the 105B was discontinued some time ago.
Good luck!
http://forum.moogmusic.com/viewtopic.ph ... 72&p=19181
The CPU is stuffed it seems, sorry about that. You'll have to send it to Moog for fixing, assuming they still have replacement parts because the 105B was discontinued some time ago.
Good luck!
-
- Posts: 2
- Joined: Mon Feb 15, 2016 3:05 pm
Re: Help please!! BassMurf broken? all 3 LEDS light yellow
Well, okay - I´ll ask Moog if they could handle the repair.
By the way, does anyone know a good repair service for this kind of issue? In Europe, preferably in Germany?
Thank you very much for the info!
By the way, does anyone know a good repair service for this kind of issue? In Europe, preferably in Germany?
Thank you very much for the info!