MF Knobs & Jacks on a PC Board or Point-to-Point?
MF Knobs & Jacks on a PC Board or Point-to-Point?
Have any of you ever seen the inside of a MoogerFooger? Are the knobs and jacks soldered directly to a PC board or are they point-to-point wired?
Sculptair
- paramnesia
- Posts: 126
- Joined: Tue Mar 03, 2015 11:35 am
- Location: Asheville, NC
- Contact:
Re: MF Knobs & Jacks on a PC Board or Point-to-Point?
PC Board
https://www.gearslutz.com/board/attachm ... f-gutz.jpg
http://till-kopper.de/MF-102.html
http://till-kopper.de/MF-104Z.html
Legacy Modular products are point to point
https://www.gearslutz.com/board/attachm ... f-gutz.jpg
http://till-kopper.de/MF-102.html
http://till-kopper.de/MF-104Z.html
Legacy Modular products are point to point
Sub37TE V1.2 / 4 X CP-251, 3 x MF-104M, MF-102, MF-107, MF-108M, 4 x Mother32, MP-201
My Eurorack https://www.modulargrid.net/e/racks/view/2268669
My Pedal Board https://www.modulargrid.net/p/racks/view/461843
My Eurorack https://www.modulargrid.net/e/racks/view/2268669
My Pedal Board https://www.modulargrid.net/p/racks/view/461843
Re: MF Knobs & Jacks on a PC Board or Point-to-Point?
I changed out the outer metal case of an MF-102 a while ago (somebody had painted it poorly). It had the pots soldered directly to the PCB.
MemoryMoog Plus (with Kenton Midi Upgrade Kit) MF-101 Lowpass Filter, MF-102 Ring Mod, MF-103 Stage Phaser, MF104M Delay, MF-105M MIDI MuRF, MF-107 Freq Box, MF-108M ClusterFlux and CP-251 Control Processor.