Moog Music Forum

Happy to report it worked for me.

Have emailed tech support? They replied to me within 24 hours.

Pantherairsoft wrote:Happy to report it worked for me.

Have emailed tech support? They replied to me within 24 hours.

Excellent. Which is to say that it's excellent that it's a confirmed bug with a work-around and a fix in store.

Explains why I never have the issue. My 108m is on a pedalboard which is on the far side of my home studio and when I want Midi, I move it and it's powered up before I plug in the Midi.

Thanks for researching and following up with that post.

still no luck here with the new firmare (got it from support) carefull reboot without midi and sending cc to activate in case vram is bugged

#609 downunder today

I can get sync by powering up the 108 then plugging in MIDI, but it's pretty flaky and drops out after a while. The rate LED then reverts to red.

Here's hoping a firmware update comes along soon.


Great sounds though; have tried it on the SH101, bass guitar and Machinedrum. Impressive feedback and mangling!

this boiled down to 3 things
*midi clock crashed during certain circumstances - fixed in latest firmware
*divide ratio in manual was wrong so i didnt hear it was in sync after sending cc to sync it
*i was looking at the wrong LED to turn yellow

Glad to hear its sorted - hopefully the rest of us can get our hands on the firmware soon!

As for the wrong LED thing - oooops

I've also asked (via Rosser) them to implement an LFO phase reset on receipt of a MIDI start message. For me it makes the most sense, especially with the sharp waves (square, ramp/saw and S&H).