Moving the mf101's cutoff frequency?

Plug in here for info tips and strategies for your Moogerfooger Analog Effects. Connect more than one for plenty of fun!
Post Reply
nrvana8775
Posts: 28
Joined: Wed Aug 25, 2010 2:11 pm

Moving the mf101's cutoff frequency?

Post by nrvana8775 » Tue Jul 19, 2011 1:54 am

I was wanting to shift the cutoff frequency using various waveshapes. It doesn't really seem to work as I expected. For instance, keeping the cutoff at 250, I'll hear the lfo, but it will be at 250 hz. I would like to shift the frequency from the 250hz to 1khz (just an example) range using a square wave. I figured that I could do this with my mp201 or lightfoot labs goatkeeper, but it isn't really working.

Any suggestions?

noSpoonMusic
Posts: 36
Joined: Tue Jun 08, 2010 6:11 pm

Re: Moving the mf101's cutoff frequency?

Post by noSpoonMusic » Tue Jul 19, 2011 2:10 am

Have you tried adjusting the LFO amount?

nrvana8775
Posts: 28
Joined: Wed Aug 25, 2010 2:11 pm

Re: Moving the mf101's cutoff frequency?

Post by nrvana8775 » Tue Jul 19, 2011 10:34 am

noSpoonMusic wrote:Have you tried adjusting the LFO amount?


The lfo amount is at full (4,000 something) on the mp-201. I don't think the goatkeeper will really work as a source, but the problem is that the mp-201 lacks many of the waveforms.

Pantherairsoft
Posts: 106
Joined: Sat Jan 08, 2011 4:39 pm
Location: Nottingham, UK

Re: Moving the mf101's cutoff frequency?

Post by Pantherairsoft » Wed Jul 20, 2011 4:11 am

Something isn't set up right then… I use my MP-201 for just this thing…

Using a TS jack-jack?
Unipolar or Bipolar?
What are the knobs on the fooger' set to? (take a pic for us?)
What settings are you currently set to on the MP-201?

Shep
Shep on Bass - My website & blog
Bitnormal Records - Netlabel specialising in electronica
KADE - Improvised live electronica
Patient Zero - International hip-hop & electronica collaboration

Post Reply