creating a tracking ringmod

Plug in here for info tips and strategies for your Moogerfooger Analog Effects. Connect more than one for plenty of fun!
Post Reply
ColorForm2113
Posts: 1279
Joined: Fri Feb 02, 2007 2:17 am
Location: Illinois(e)

creating a tracking ringmod

Post by ColorForm2113 » Mon Jun 06, 2011 11:40 am

I was just watching some freqbox demos and got to thinking; if you hard sync the freqbox, take the osc out to the carrier in on the ringmod, would this create a tracking ringmod similar to the one on the pigtronix mothership? Essentially it would have more control I would think too, minus the glide though
My modular so far: Q104, Q106 x2, Q107, Q108, Q109 x2 , Q116, Q118, Q127 w/Q140, Q130, STG Wave Folder, Mixer and Mankato playing with Moog Voyager, VX-351, CP-251, MF-104M x2 ( STEREO!) Volca Beats and Bass, Arturia Beat step

cliffman
Posts: 154
Joined: Tue Nov 04, 2008 1:08 pm

Re: creating a tracking ringmod

Post by cliffman » Mon Jun 06, 2011 9:11 pm

Sadly, no.
The OSC out on the freqbox does not change/track frequency in this case -
the Hard Sync is retriggering things, and you hear an apparent pitch tracking -
but the OSC out is not affected by this, there you hear a constant pitch, controlled
only by the big knob, or by CV in.

You can run the Mix out of the FreqBox into the carrier in, but no pitch offset, so
more mangled sound, not very ringmodish.

And if you have CV, you can move the ring mod freq around with that, no need
of a freqbox.

Just Me
Posts: 1144
Joined: Fri Feb 27, 2009 11:46 pm
Location: The Great Southwest

Re: creating a tracking ringmod

Post by Just Me » Mon Jun 06, 2011 11:25 pm

Just feed the 1V/oct CV signal into the ring mod FREQ and it will track.
"Music expresses that which can not be said and on which it is impossible to be silent."

ColorForm2113
Posts: 1279
Joined: Fri Feb 02, 2007 2:17 am
Location: Illinois(e)

Re: creating a tracking ringmod

Post by ColorForm2113 » Mon Jun 06, 2011 11:40 pm

cliffman wrote:Sadly, no.
The OSC out on the freqbox does not change/track frequency in this case -
the Hard Sync is retriggering things, and you hear an apparent pitch tracking -
but the OSC out is not affected by this, there you hear a constant pitch, controlled
only by the big knob, or by CV in.

You can run the Mix out of the FreqBox into the carrier in, but no pitch offset, so
more mangled sound, not very ringmodish.

And if you have CV, you can move the ring mod freq around with that, no need
of a freqbox.
hmm, that's weird, I remember seeing a youtube video from big city music where they plugged a guitar into the freqbox, turn the mix to zero, osc out went to input on the pigtronix attack/sustain, and the clean out went to the trigger in, then audio out went to a delay then amp. They hard sync the guitar signal and the osc out tracked the pitch and the attack/sustain acted as a vca.
Just Me wrote:Just feed the 1V/oct CV signal into the ring mod FREQ and it will track.
sorry I should have mentioned I was looking to do this with a guitar. I know I can do this with a cv signal
My modular so far: Q104, Q106 x2, Q107, Q108, Q109 x2 , Q116, Q118, Q127 w/Q140, Q130, STG Wave Folder, Mixer and Mankato playing with Moog Voyager, VX-351, CP-251, MF-104M x2 ( STEREO!) Volca Beats and Bass, Arturia Beat step

ColorForm2113
Posts: 1279
Joined: Fri Feb 02, 2007 2:17 am
Location: Illinois(e)

Re: creating a tracking ringmod

Post by ColorForm2113 » Mon Jun 06, 2011 11:57 pm

My modular so far: Q104, Q106 x2, Q107, Q108, Q109 x2 , Q116, Q118, Q127 w/Q140, Q130, STG Wave Folder, Mixer and Mankato playing with Moog Voyager, VX-351, CP-251, MF-104M x2 ( STEREO!) Volca Beats and Bass, Arturia Beat step

Post Reply