Multi-expression controller one moogerfooger

[black.decibel.art]

Hi,
I am curios has anyone tried controlling multiple expressions on a single moogerfooger at the same time with a dual expression pedal (lehle dual, Boss EV-30) or something like Multi-expression controller? Would that work and can you achieve some interesting results or benefits? Would it require a specific pedal, I assume you cannot use Y cable to split the expression signal but it has to be at least dual out (correct me if I am wrong).

Another question is it possible to cross-patch the expression I/O on moogerfooger, eg connect Envolope Out with a Mix In using a patch cable on the same Lowpass filter. Just thinking outside of the box is there another creative way to use this pedal? Thanks

[FeelinDank]

Haven’t used expression pedals on any of the Moogerfoogers yet, but have set up the CV out from my Subsequent37 CV to send the same signal from all 4 CV outputs. Also have utilized many different Moogerfoogers effecting one Moogerfooger. I have connected 2 or 3 (of that same signal) to one ‘fooger from Subs.37cv (I think I did it with the MF-103 and MF-107). Every Moogerfooger’s “Frequency” CV input (or whatever their equivalent is) for me is a go-to. The MF-103 is interesting when “Sweep” and “Resonance” have the same CV signal: phaser tracks frequency while resonance increases higher up (also per note tracking; MF-101 should be similar too …I don’t think the MF-101 “Sine feedback” tracks “nicely” when resonance is cranked tho). I believe you are right with the “don’t do a Y-cable” …I think we’ve both read that thread haha.

Definitely possible. I just got my MF-101, but I’ve utilized the “Envelope Out” on the MF-107 to things within that same MF-107. PLEASE PLEASE PLEASE go nuts with the “Mix” input on your Moogerfoogers …audio rate modulation of the “Mix” input seems like lite-weight ring modulation on some Moogerfoogers.

[black.decibel.art]

Thanks for the reply, sounds interesting I will have to do some further experiments.
On that note seems that EV-30 only 2x 10k, so I've checked for Moog products it would have to be 50k-100k to work properly. I'll have to dig around for a dual expression with 2x 50k. I have a feeling that would work then in the end if I find one for a reasonable price.

Oh found this it's very handy shows resistance for all common expression pedals.
http://expressionpedals.com/list-of-expression-pedals