Switch for Expression Pedal

Plug in here for info tips and strategies for your Moogerfooger Analog Effects. Connect more than one for plenty of fun!
Post Reply
Sculptair
Posts: 68
Joined: Mon May 07, 2012 4:58 pm

Switch for Expression Pedal

Post by Sculptair » Mon May 10, 2021 4:21 pm

I have a moog expression pedal that I'd like to use at the expression input port on several pedals, one at a time. Is there such a thing as a CV multi switch that would direct the expression pedal to the pedal of my choice on the fly?
Sculptair

Markyboard
Posts: 328
Joined: Wed Jul 30, 2003 6:46 pm
Location: Springfield, VA

Re: Switch for Expression Pedal

Post by Markyboard » Tue May 11, 2021 7:29 am

Here's one for Intellijel Eurorack frames:

https://intellijel.com/shop/eurorack/1u ... d-mult-1u/

Sculptair
Posts: 68
Joined: Mon May 07, 2012 4:58 pm

Re: Switch for Expression Pedal

Post by Sculptair » Tue May 11, 2021 1:00 pm

Thanks for that. If I understand correctly, it splits a single signal into multiple signals to control multiple parameters simultaneously. As cool as that is, I'm looking to assign the expression pedal to a single effect parameter, and then hold that parameter while I assign the pedal to another effect parameter, etc. I've learned that the expressionator by mission engineering can do this. Super super cool. https://missionengineering.com/shop-2/p ... ssionator/
Sculptair

Markyboard
Posts: 328
Joined: Wed Jul 30, 2003 6:46 pm
Location: Springfield, VA

Re: Switch for Expression Pedal

Post by Markyboard » Wed May 12, 2021 7:15 am

Ah, that’s a bit different now. In the development world (differentiated from the developed world) we call that scope creep :mrgreen: .

Wasn’t aware of that Mission Engineering box-very cool. The other one to look for (used) is a Moog MP-201 pedal/processor. It’ll do what you want with 4 cv outputs and plenty more.

Post Reply