Unison In Init Patch

Polyphonic Analog Synthesizer
Post Reply
eltobosolo
Posts: 10
Joined: Wed Sep 14, 2016 10:01 pm

Unison In Init Patch

Post by eltobosolo » Sat Nov 19, 2022 2:52 pm

Hi All,

Maybe this has always been happening and I never noticed... but when I load the init patch, it seems that there is some sort of unison mode with 4 voices going on. That is, when I press a single key, I can see 4 voices are used even though I don't have unison mode on. If I set mono mode on then only one voice is used. Is there a setting somewhere that I don't know about?

Thanks!

User avatar
till
Posts: 1359
Joined: Tue Nov 22, 2005 6:17 pm
Location: south-west Germany
Contact:

Re: Unison In Init Patch

Post by till » Sun Nov 20, 2022 12:24 pm

Disconnect all USB and MIDi cables and try again? Is it better? If yes, you got some MIDI loop.
keep on turning these Moog knobs

Sequence:
Prodigy * minimoog '79 * Voyager * MF102 * MF103 * MF104z * MP201 * Taurus 3 * Minitaur * Sub Phatty * MF105 * Minimoog 2017+ MUSE * One 16

eltobosolo
Posts: 10
Joined: Wed Sep 14, 2016 10:01 pm

Re: Unison In Init Patch

Post by eltobosolo » Sun Nov 27, 2022 6:39 pm

You nailed it - thank you!

User avatar
till
Posts: 1359
Joined: Tue Nov 22, 2005 6:17 pm
Location: south-west Germany
Contact:

Re: Unison In Init Patch

Post by till » Mon Nov 28, 2022 5:45 am

If you use the original setup, set the Moog One to LOCAL OFF mode. It should work this way with DAWs
keep on turning these Moog knobs

Sequence:
Prodigy * minimoog '79 * Voyager * MF102 * MF103 * MF104z * MP201 * Taurus 3 * Minitaur * Sub Phatty * MF105 * Minimoog 2017+ MUSE * One 16

Post Reply