Voice 11 ENV, note hang & bas tone from SVF through fx

Polyphonic Analog Synthesizer
Post Reply
sundi0
Posts: 5
Joined: Wed Aug 10, 2016 3:39 pm

Voice 11 ENV, note hang & bas tone from SVF through fx

Post by sundi0 » Fri Mar 12, 2021 1:13 pm

My One developed a problem today. I thought I was getting a MIDI loop causeing a low note to hang but on further investigation I found that if I turn off the fx (not the eventide one) the tone goes away. Switching presets does not help (which should get rid of hanging notes and reset the patch to the next set of vaues). I noticed that also if I turn off any VCO going through the SVF in the mixer section this also stops the tone hanging. Also there is some very strange things going on with the played notes every now and then (longer sustained notes in among the playing). This looks like it is happening on voice 11 every time. I tried reverting to firmware 1.3 (been running 1.4 since it came out)but its all the same.
I have recently had a move around in my studio so I'm wondering if a voice card could have moved and just need re-seating but darent open the beast up! Any advice?

Post Reply