Voices 15 and 16 wave shape mix issue

Polyphonic Analog Synthesizer
Post Reply
Swave
Posts: 3
Joined: Sat Jan 16, 2021 10:11 pm

Voices 15 and 16 wave shape mix issue

Post by Swave » Sat Jan 16, 2021 11:48 pm

Hey I just purchased a brand new 16 voice Moog One. Recently I was playing around with the INT patch and I discovered that when the mix knob in the oscillator sections is in the center position the low end completely cuts out, but only on voices 15 and 16. This happens on all 3 oscillators. Is this a bug? Or is this a hardware issue. If anyone has an idea please let me know. Thanks

kendallhalbert
Posts: 37
Joined: Wed May 20, 2015 7:05 pm

Re: Voices 15 and 16 wave shape mix issue

Post by kendallhalbert » Sun Jan 17, 2021 5:30 pm

What firmware version are you on?
Original Model D, Taurus 1, Source, Minitaur, Voyager RME, One 16 voice

Swave
Posts: 3
Joined: Sat Jan 16, 2021 10:11 pm

Re: Voices 15 and 16 wave shape mix issue

Post by Swave » Sun Jan 17, 2021 7:32 pm

1.4

Swave
Posts: 3
Joined: Sat Jan 16, 2021 10:11 pm

Re: Voices 15 and 16 wave shape mix issue

Post by Swave » Sun Jan 17, 2021 8:31 pm

Hey so I just ran the oscillator calibration and now all the voices thin out when the mix knob is in the center. Maybe this is how it is suppose to be. Now another issue is Voice 16 is now always panned to the right. I will try to run the calibration again.

Post Reply