L/R Swapped on Synth Effect Output to Sub Outs

Polyphonic Analog Synthesizer
Post Reply
devnull
Posts: 24
Joined: Sat Dec 19, 2020 1:00 pm

L/R Swapped on Synth Effect Output to Sub Outs

Post by devnull » Wed Dec 23, 2020 4:23 pm

The L/R channels on the outputs of the Synth Effects (Wet signal) are swapped on the Sub Outs at Firmware 1.4 level.

They are OK on Main Out.

Recreate:
INIT Preset.
Pan 100% Left.
Load Synth Effect - Delay (or Stereo Delay).
Synch Off
Set Delay (L and R Delay) to 1000ms.

Play a note.
On Main Out - Note and echoes are both on the left channel.
On Sub Out - Note is on the left channel and echoes are on the right channel.

Pan 100% Right

Play a note.
On Main Out - Note and echoes are both on the right channel.
On Sub Out - Note is on the right channel and echoes are on the left channel.

Post Reply