Sub 37 (missing screws?)

Everything Sub.
Post Reply
valverdeleov
Posts: 3
Joined: Fri Aug 05, 2016 2:54 pm

Sub 37 (missing screws?)

Post by valverdeleov » Thu Sep 15, 2022 12:38 am

Hi guys,

The back section of the bottom panel of my sub 37 only has one screw out of the 5 holes that the panel has to fit these. I wonder if it shipped like that or if these screws were stolen when I rented my synth this past weekend.

Long story short, I rented my Sub 37, it came back with something loose inside. It turned out to be a screw that seems to fit on those bottom panel holes, I already emailed Tech Support to try to get a better idea of where does that screw belongs, but on the meantime I wanted to check with other Sub37 owners, or similar synths. wish my luck, I'm feeling super paranoid right now.

Best regards,
Leo
Attachments
Picture #1 loose screw.jpg
Picture #2 lower panel missing screws.jpg

MrChumley
Posts: 28
Joined: Mon Jun 20, 2022 9:06 am

Re: Sub 37 (missing screws?)

Post by MrChumley » Thu Sep 15, 2022 6:59 am

Something not right there. My 25 only has two of those holes (being shorter than the 37) but they both have screws in them.

User avatar
till
Posts: 1359
Joined: Tue Nov 22, 2005 6:17 pm
Location: south-west Germany
Contact:

Re: Sub 37 (missing screws?)

Post by till » Fri Sep 16, 2022 3:50 am

Looks like the users that rented that synth did something like opening it.
keep on turning these Moog knobs

Sequence:
Prodigy * minimoog '79 * Voyager * MF102 * MF103 * MF104z * MP201 * Taurus 3 * Minitaur * Sub Phatty * MF105 * Minimoog 2017+ MUSE * One 16

valverdeleov
Posts: 3
Joined: Fri Aug 05, 2016 2:54 pm

Re: Sub 37 (missing screws?)

Post by valverdeleov » Fri Sep 16, 2022 11:53 am

I'm trying to avoid freaking out, but everything's very odd... And I haven't received an answer from Moog yet.

Post Reply