SUB 37 NO FILTER AND OVERDRIVE

Everything Sub.
Post Reply
Wavecore
Posts: 2
Joined: Mon Dec 21, 2015 9:28 am

SUB 37 NO FILTER AND OVERDRIVE

Post by Wavecore » Wed Nov 04, 2020 6:55 am

Hi
I have a BIG problem with my sub 37.
2 knobs doesn’t work on the synth : FILTER and overdrive.
BUT both functions work if I use the Moog Sub37 Editor on my DAW on my Laptop with the Moog connected in USB.
MOOG sent me a new left board. I’ve change it but the problem is still the same.
Hard reset, firmware reinstalled.
If the filter and overdrive function both work using the editor WHY the physic knobs on the synth don’t work…. Midi implantation…?
Thanks to help me if you can….
CHEERS !!

User avatar
till
Posts: 1233
Joined: Tue Nov 22, 2005 6:17 pm
Location: south-west Germany
Contact:

Re: SUB 37 NO FILTER AND OVERDRIVE

Post by till » Wed Nov 04, 2020 12:23 pm

Strange.

But just to be sure it isn't a MIDI related problem: did you try using these two knobs without MIDI and USB connected?

And check, if the knobs transmit MICI CCs when connected. The best would be using MIDI out only and not the MIDI in at the same time, therefor not using USB.
keep on turning these Moog knobs

Sequence:
Prodigy * minimoog '79 * Voyager * MF102 * MF103 * MF104z * MP201 * Taurus 3 * Minitaur * Sub Phatty * MF105 * Minimoog 2017+ MUSE * One 16

Post Reply