Maybe I'm an idiot, but my sub phattys LFO modulates the signal even with the mod wheel all the way down (in the off position). It is noticeable already with the "pitch amt" set to 3.
Is the synth supposed to do this? Is it a hardware / software bug? Do I have to change some settings or calibrate the synth?
I had some other issues after updating the firmware a couple of years ago, but I don't know if that is the cause to this issue.
Anyone with a fix for this?
Sub phatty LFO still modulates with mod wheel down
-
stiiiiiiive
- Posts: 2545
- Joined: Tue Aug 30, 2011 2:58 pm
- Contact:
Re: Sub phatty LFO still modulates with mod wheel down
Hi and welcome to the forum 
It seems like a miscalibration. I don't know if modulation wheel is calibrated through the calibration routine, but worth trying that.
If you do the full calibration, keep in mind that the latest programs you've cooked were saved with bad calibration; you may want to try them out and fine tune them after everything is back to its right place.
Hope this helps!
It seems like a miscalibration. I don't know if modulation wheel is calibrated through the calibration routine, but worth trying that.
If you do the full calibration, keep in mind that the latest programs you've cooked were saved with bad calibration; you may want to try them out and fine tune them after everything is back to its right place.
Hope this helps!
Toxic Overdrive | Minkovski | DNOT | Maetherial | Folie à 6
Re: Sub phatty LFO still modulates with mod wheel down
Thank you.
In the manual I can find only note calibration (p.37). Do you think the oscilator(note) calibration would fix the issue? I can't find anything in the manual regarding lfo/mod/full calibration.
How would I go about doing a full calibration?
In the manual I can find only note calibration (p.37). Do you think the oscilator(note) calibration would fix the issue? I can't find anything in the manual regarding lfo/mod/full calibration.
How would I go about doing a full calibration?