Sub 37 firmware version 1.10 list of changes

[motwell]

Can anyone please point me to the list of changes for Sub 37 firmware version 1.10? The download notification says "see the Sub 37 manual for the list of changes" (or something similar).

I've looked thru the manual, I've searched the .pdf for "1.10," "changes," "list," etc. But I cannot find the list (actually brief descriptions would also be helpful). I know there are some great usability and feature improvements in the release, don't want to miss them.

Sorry if it's right in front of me somewhere, but it's not apparent to me.

Thanks for your help!

[breun]

I suppose you are referring to version 1.1.0, as there is no version 1.10. The Sub_37_v_1_1_0.zip file contains a folder called Documentation, which contains a file called v1_1_Change_Log.pdf, which seems to be what you're looking for.

It contains the following information:

MOOG SUB 37 - CHANGE LOG

New in 1.1.0
• Sequencer Step Edit Mode
• Quick mapping of programmable Mod Destinations
• Sequences can now include Skipped Steps and Ratchet
• Swing for the Arpeggiator, Sequencer, & Synced LFOs
• Sequencer Mod Destination
• Sequencer Mod Only
• CV Mapping
• Sequence Mod Amount, Step 1 Reset, Ratchet Count, via CV Mapping
• Sequence Step Advance, Sustain Pedal, and Gate Invert for Gate CV Mapping
• Variance parameter for detuning of oscillators
• Fixed sequencer MIDI output now sends MIDI notes for both Pitch 2 & Pitch 1 when in Duo Mode.
• Fixed when LATCH is on, playing a key, changing KB OCTAVE and then playing the same key now updates the
played octave correctly.
• Fixed Amp EG Latch ON no longer affects Filter EG.
• Fixed Preset Name now updates when you INIT the preset.
• Fixed Pitch Bend Up/Down changes now take effect when Local Control is OFF.
• Keyboard Transpose/Quick Keyboard Transpose
• Tying/Untying Groups Of Steps
• Adding/Removing Rests
• Nondestructively choosing start/stop points
• Rotating Sequencer Pattern
• Sequence Send/Receive via SysEx
• Editing Hi/Lo Note in DUO Step
• Latch Restart
• Delay Program Change
• Volume Calibration
• Send MIDI Start/Stop
• Follow Song Position Pointer
• Sequence Page Chase
• Refer to Sub 37 Manual for complete list of changes in v1.1.0

New in 1.0.7
• Fixed parameter mismatch when Master Volume set by MIDI (CC7) • Mod buss CTRL4 (MIDI CC 2) value now updates correctly
• Improved Relative pot mode behavior when reversing direction
• Pot min/max values now reported correctly, fixes Pass-Thru pot mode

New in 1.0.6
• Fixed MIDI Time Code handling (MTC is ignored). • Fixed MIDI Output Filters - Panel, Wheels.

New in 1.0.5
• Small improvement to main CPU startup routine.

New in 1.0.4
• Added MIDI Clock/Start/Stop output (GLOBAL MENU 2.5: CLOCK OPTIONS)
• Panel Mode gets correct rotary switch positions
• Change in External Sync behavior: does not require MIDI Start message
• Fixed possible MIDI loop when Local Control turned off
• Fixed bug where Mod Wheel value didnʼt go completely to zero via external MIDI
• Velocity is now updated when re-playing an arp note which is already latched
• Fixed stuck notes via arpeggiator MIDI output
• Improved USB MIDI reliability
• Fixed NRPN output/response for Mod 1 & 2 PGM Destinations and Sources
• Fixed bug that could cause arpeggiator to freeze
• Output Mute button did not work under some circumstances; now always works.
• GLOBAL menu now shows both main & panel firmware version numbers.
• MIDI menu: POLY MAX number display was off by one (values are 1-16, was showing 0-15)

New in 1.0.3
• Fixed possible freeze during patch changes
• Fixed: after scrolling rapidly through presets, patch select LEDs could remain lit
• When exiting compare mode, patch edited status is correctly restored (asterisks reappear if necessary)

New in 1.0.2
• Custom tuning selection
• Poly mode
• MIDI output filtering now includes keyboard and wheel options • Arpeggiator and sequencer reliability improvements
• MIDI sync behavior fixes and improvements
• Numerous other user interface reliability improvements

New in 1.0.1
• Arpeggiator rate knob responsiveness improved
• Tap tempo no longer requires SYNC to be on
• Arp and LFO rate knobs now give correct settings at maximum position • LFO 2 Sync at max tempos and max clock divisions is now stable
• Pitch CV reliability improved
• Local Control: KNOBS is now Local Control: PANEL

The most recent version of the Sub 37 firmware is 1.2.0 by the way, which is included in the Sub 37 software editor download (Sub_37_Editor_v1_0_0.zip), since the Sub 37 software editor requires firmware 1.2.0.

[motwell]

Thanks, @breun! You're right - i meant version 1.1.0 (musta been a typo).

Yes i have that change log document. That's what caused my question: the last line item in the list of v 1.1.0 changes reads "Refer to Sub 37 Manual for complete list of changes in v1.1.0" (right above "New in 1.0.7"). I've looked thru the manual and searched it for several obvious search terms, but so far i haven't found that complete list of changes.

I remember seeing some explanations of new features for modulation routing as well as sequence programming, but maybe it was a post by Amos? I guess what i'm actually looking for are explanations of how to use some of the new features (e.g., step sequencing) which are indeed listed in the change log. I'll cross reference that list with the manual to see if they're in there after all (just not in the form of an obvious list).

Thanks also for the heads-up on v 1.2.0 - i was looking for that on the website the other day, couldn't find it, but now that you've given me the filename i'll search the site for that file.

[motwell]

Okay i found my e-mail (from April 18 - how soon they forget! ) with the announcement and i'm downloading the editor and v 1.2.0 now.

@breun, thanks for your help!