Fine Tune Pot Range

Everything Sub.
Post Reply
Jornt
Posts: 3
Joined: Wed Jun 08, 2016 3:58 pm

Fine Tune Pot Range

Post by Jornt » Fri Jun 10, 2016 3:07 pm

Hi there my fellow Moogers,

I have my first Moog and it's the great Sub37!
I'm very happy with it tough I have one problem/question.

The Synth is in Tune when the Fine Tune knob is at 5 o'clock/full open, at 11;)
I have noticed that when I use the Fine Tune in edit mode that it doesn't go to 100%
It doesn't go from A to Z in the alphabet and it doesn't go to 100% swing etc.
Full open is about 49%
Is the pod broken or is this something that I can fix in the menu?
I can't find anyone els on the forum who has a question about it but I hope some one can help me with this.

All the best,
Jornt

User avatar
breun
Posts: 359
Joined: Sun May 05, 2013 1:36 pm
Location: Utrecht, The Netherlands

Re: Fine Tune Pot Range

Post by breun » Fri Jun 10, 2016 7:59 pm

I'm not sure if it would help in this case, but it shouldn't hurt either: have you tried running a note calibration? See page 47-48 of the manual for more info on this.

bernard
Posts: 64
Joined: Sun Jan 18, 2015 4:04 am

Re: Fine Tune Pot Range

Post by bernard » Sun Jun 12, 2016 3:44 am

Hey Jornt,

don't worry.
You should calibrate your pots. This is done by sending three little SysEx files to your Sub37.
Contact your local Moog distributor or ask people @Moog (Andy, Amos, Gil) directly to get these files.

cheers,
Bernard

Jornt
Posts: 3
Joined: Wed Jun 08, 2016 3:58 pm

Re: Fine Tune Pot Range

Post by Jornt » Fri Jun 17, 2016 4:14 am

Hi Bernard,

Thanks for your reply, I think your right because the synth is in tune the pot just doen't go to 100%
I'll send an e mail to the people at Moog.

Thanks I'll let you know if it works.

All the best,
Jornt

Jornt
Posts: 3
Joined: Wed Jun 08, 2016 3:58 pm

Re: Fine Tune Pot Range

Post by Jornt » Fri Jun 17, 2016 6:40 pm

Hi Bernard,

Thanks for your reply.
I've received the files and the c6 program and did the calibration.
Now the fine tune pot works perfectly.

I'm really happy it works so now I can dial in the whole alphabet and have the synth in tune somewhere around 12 o'clock :)

Thanks again.

Jornt

artofnois
Posts: 46
Joined: Fri Oct 31, 2014 8:24 pm

Re: Fine Tune Pot Range

Post by artofnois » Sun Jun 19, 2016 3:15 am

Can you post this files, so I can calibrate in the cemter of pot?
I have the files to calibrate the Wave Pot if someone need it.

Post Reply