Sub 37 Editor v1.0.0 & Firmware v1.2.0 is now available

Everything Sub.
User avatar
[email protected]
Posts: 125
Joined: Sat Feb 13, 2016 10:52 am

Re: Sub 37 Editor v1.0.0 & Firmware v1.2.0 is now available

Post by [email protected] » Wed Apr 20, 2016 3:37 am

brianoblivion wrote:Tried to install the new firmware on my Sub 37 and now all the lights are turned on, the screen is blank and I get no sound or Midi. Tried several times to install, turned it on and off, no luck. Any tips?



Had that happen to me once... my heart nearly stopped!
But I just startet the whole process again and everything was fine afterwards.

Do you have a USB hub between computer and synth? If so, try with a direct connection.

Bass Player and Synthesist.
Sub 37 #8490 with SSQ37 Update | Virus TI2 | Elektron MD MNM A4 | Roland SE-02
Mac OS X 10.14 | Cubase Pro 10.0 | Ableton Live 9.6 | MainStage 3 | RME UFX+

dangerous
Posts: 1
Joined: Wed Apr 20, 2016 6:45 am

Re: Sub 37 Editor v1.0.0 & Firmware v1.2.0 is now available

Post by dangerous » Wed Apr 20, 2016 6:50 am

Same happened to me, the PDF in the 'Manual Install' folder says that this could happen (although I was using the OSX installer):

THE DISPLAY IS BLANK AND/OR ALL OF THE LEDS ARE LIT.
The firmware on your Sub 37 has not been updated correctly. Repeat the update procedure. Note that nothing will appear on the display until the panel firmware update is complete.


Repeating the update worked for me. I think the first time around my laptop might have fallen asleep while the update was in progress.

pb21
Posts: 122
Joined: Tue Apr 21, 2015 2:24 am

Re: Sub 37 Editor v1.0.0 & Firmware v1.2.0 is now available

Post by pb21 » Wed Apr 20, 2016 7:26 am

here is a link to the firmware update video I made aimed at hobbyists or beginner level

https://www.youtube.com/watch?v=qb7bPxMaL0w


and How to setup in Ableton

https://www.youtube.com/watch?v=QdIs5ric-yw

User avatar
LuLoop
Posts: 214
Joined: Tue Oct 27, 2015 5:09 am
Location: Belgium
Contact:

Re: Sub 37 Editor v1.0.0 & Firmware v1.2.0 is now available

Post by LuLoop » Wed Apr 20, 2016 9:40 am

pb21 wrote:here is a link to the firmware update video I made aimed at hobbyists or beginner level

https://www.youtube.com/watch?v=qb7bPxMaL0w


and How to setup in Ableton

https://www.youtube.com/watch?v=QdIs5ric-yw


Very nice Peter.

I am sure, there will be many People who like and need this.

Regards Luloop
Sorry for my English..It is not my Mother language
Machines: Sub 37.
Systems: Win7 64 and Mac Pro 10.9.4 Logic pro X

DaveBee
Posts: 61
Joined: Sat Apr 11, 2015 11:08 am
Location: Ontario, Canada

Re: Sub 37 Editor v1.0.0 & Firmware v1.2.0 is now available

Post by DaveBee » Wed Apr 20, 2016 8:48 pm

Ok I seem to have conflicting info and not sure whether to proceed or not.

The instructions with the software say NOT to install the USB Midi driver until the firmware updater is installed.

This comment says to install the USB Midi driver first ... and then the firmware updater.

I tried to install the USB Midi driver for windows 7.0 (v 2.23) per this comment and it kept telling me to connect the Sub 37 but would not recognize it as being connected.

Again as per this comment I then installed the USB Midi driver for Windows 8/10 ( v 3.3) and it did seem to install.

However after rereading the downloaded instructions it says run the firmware installer first so I am hesitant to proceed.

Can anyone clarify the proper order of these operations? Thanks

Amos
Posts: 2438
Joined: Wed Jul 23, 2003 3:11 pm

Re: Sub 37 Editor v1.0.0 & Firmware v1.2.0 is now available

Post by Amos » Wed Apr 20, 2016 9:07 pm

The new USB driver doesn't work with the previous Sub 37 firmware (v1.1 or earlier).
The only thing the USB driver gets you is multi-client USB MIDI, which you need in order to use the editor plug-in within your DAW on Windows.

So my recommendation is to do the firmware update before installing the USB driver, if the Sub 37 firmware is currently v1.1.0 or earlier. In fact, I think this may be a necessity. If you've installed the USB driver prior to updating the Sub 37 firmware, I'd recommend going to the Windows control panel and uninstalling the Sub 37 USB driver, then install the firmware update.

Sorry for any confusion; during the long beta-testing process we did a lot of firmware updates where it didn't matter if the USB driver was installed or not, since we were updating from beta firmware versions which already supported the USB driver.

DaveBee
Posts: 61
Joined: Sat Apr 11, 2015 11:08 am
Location: Ontario, Canada

Re: Sub 37 Editor v1.0.0 & Firmware v1.2.0 is now available

Post by DaveBee » Wed Apr 20, 2016 9:12 pm

That supports the documentation. I will try that Amos. Thanks for the quick response!

DaveBee
Posts: 61
Joined: Sat Apr 11, 2015 11:08 am
Location: Ontario, Canada

Re: Sub 37 Editor v1.0.0 & Firmware v1.2.0 is now available

Post by DaveBee » Wed Apr 20, 2016 10:20 pm

Uninstalled the USB driver. Ran the Firmware Updater. It took several attempts at stopping and starting the Sub 37 before the firmware install finally started. Ran for quite a while but did complete successfully. Installed the USB Midi 2.23 driver for Win 7. Installed the Editor. Changed the Midi In/Out ports and seemed to be working ok. Editor screen looks great. Tried a few of the new patches ... might be a few interesting ones in there but otherwise not overall impressive. What seems to be interesting right now is the sequencer editor ... that will be a project for another day though. Thanks again Amos and Gil for responses to question. Happy to be at 1.20 now :)

acdbrn
Posts: 4
Joined: Tue Nov 17, 2015 6:08 pm

Re: Sub 37 Editor v1.0.0 & Firmware v1.2.0 is now available

Post by acdbrn » Thu Apr 21, 2016 2:15 am

The Event Viewer on my Windows 7 machine shows two errors since I installed the USB Midi driver.
This happens everytime I turn the Sub 37 on/off or plug the usb cable in.

1. Event ID 3 , source "moogsub37midi " Failed to initialize streaming."
2. Event ID 3 , source "moogsub37midi " No current sample rate."

I would like to get rid of that message spam.
Is it possible or do I need to wait for a new driver that fixes it?

AlexFishHook
Posts: 1
Joined: Sun Apr 24, 2016 10:50 pm

Re: Sub 37 Editor v1.0.0 & Firmware v1.2.0 is now available

Post by AlexFishHook » Sun Apr 24, 2016 11:14 pm

Just a big thanks team!

Loving this thing. not a single problem for me thus far, and tons of added workflow possibilities... not to mention the amazing new presets

Cheers!
Alex

Highlow
Posts: 3
Joined: Fri Jan 08, 2016 10:29 am

Re: Sub 37 Editor v1.0.0 & Firmware v1.2.0 is now available

Post by Highlow » Sun Apr 24, 2016 11:19 pm

Is there any particular recommendation for those running the beta version of the Editor on MacOs? Should one uninstall it or remove it from the vst/au directories before installing Version 1.0.0 or is it unnecessary?

User avatar
breun
Posts: 359
Joined: Sun May 05, 2013 1:36 pm
Location: Utrecht, The Netherlands

Re: Sub 37 Editor v1.0.0 & Firmware v1.2.0 is now available

Post by breun » Mon Apr 25, 2016 6:03 pm

I've installed the betas as well. Just update to the release, the previous version will be replaced.

Luigi2000
Posts: 2
Joined: Tue Dec 15, 2015 10:57 pm

Re: Sub 37 Editor v1.0.0 & Firmware v1.2.0 is now available

Post by Luigi2000 » Wed Apr 27, 2016 7:34 pm

I cant get recallning patches to work when restarting projects. I have the midi program change box chekt also. Any ideas? Cheers

Pro tools 12 win 7

sdconvoy
Posts: 2
Joined: Thu Jan 22, 2015 7:16 pm

Re: Sub 37 Editor v1.0.0 & Firmware v1.2.0 is now available

Post by sdconvoy » Wed Apr 27, 2016 7:42 pm

just got all my presets on my computer... if i wanted to share, is there a good spot on the forums for that?

User avatar
paramnesia
Posts: 126
Joined: Tue Mar 03, 2015 11:35 am
Location: Asheville, NC
Contact:

Re: Sub 37 Editor v1.0.0 & Firmware v1.2.0 is now available

Post by paramnesia » Thu Apr 28, 2016 8:13 am

sdconvoy wrote:just got all my presets on my computer... if i wanted to share, is there a good spot on the forums for that?


alternate site for patch sharing
http://sub37cookbook.frankwilleke.de/
Sub37TE V1.2 / 4 X CP-251, 3 x MF-104M, MF-102, MF-107, MF-108M, 4 x Mother32 + 5 x 104HP Eurorack, Windows 7 - 64 Bit | Ableton Live 9.5 + MaxMSP https://www.modulargrid.net/e/racks/view/458782

Post Reply