"Talking" Patch

Tips and techniques for Minimoog Analog Synthesizers
Post Reply
nealkaiser
Posts: 7
Joined: Tue Jan 03, 2023 12:04 pm

"Talking" Patch

Post by nealkaiser » Tue Jan 03, 2023 12:06 pm

Was just watching this video and he has this really sweet talking patch:

https://youtu.be/zL-yNFRcTNY?t=1133

I couldn't cop the settings from the video - anyone have any ideas?

User avatar
till
Posts: 1364
Joined: Tue Nov 22, 2005 6:17 pm
Location: south-west Germany
Contact:

Re: "Talking" Patch

Post by till » Wed Jan 04, 2023 10:58 am

There is VCO 3 at 2 or 4" on VCF filter modulation involved. An the VCO 3 is not using keyboard control. No FM on the VCOs.
keep on turning these Moog knobs

Sequence:
Prodigy * minimoog '79 * Voyager * MF102 * MF103 * MF104z * MP201 * Taurus 3 * Minitaur * Sub Phatty * MF105 * Minimoog 2017+ MUSE * One 16

Doddos
Posts: 22
Joined: Fri Apr 23, 2021 3:31 pm

Re: "Talking" Patch

Post by Doddos » Thu Jan 05, 2023 5:09 pm

till wrote: Wed Jan 04, 2023 10:58 am There is VCO 3 at 2 or 4" on VCF filter modulation involved. An the VCO 3 is not using keyboard control. No FM on the VCOs.
Yes, VCO 3 at ramp wave 4" and then crank up resonance (emphasis) at 5-6 and adjust amount of contour for the sweet spot. Also adjust VCF attack and sustain together with VCO 3 frequency for different pronounce and timbre

nealkaiser
Posts: 7
Joined: Tue Jan 03, 2023 12:04 pm

Re: "Talking" Patch

Post by nealkaiser » Thu Jan 05, 2023 8:56 pm

Thanks. This is helpful. I can’t seem to dial it in quite like that but will keep tinkering!

Post Reply