Wire to nothing on voyager?

Tips and techniques for Minimoog Analog Synthesizers
Post Reply
paximof
Posts: 1
Joined: Sat Oct 23, 2021 3:48 am

Wire to nothing on voyager?

Post by paximof » Sat Oct 23, 2021 3:49 am

Hi,

I was adjusting the pitch wheel to 0 on my voyager and noticed a wire going to nothing was wondering if anyone could give me some insight.

Thanks in advance.

Doddos
Posts: 22
Joined: Fri Apr 23, 2021 3:31 pm

Re: Wire to nothing on voyager?

Post by Doddos » Tue Oct 26, 2021 12:34 pm

Hi,

I've done some work on my minimoog voyager OS inside the pitch- and mod wheel area and can't recall any wire that wasn't attached to anything. There was however, if I remember right, a wire attached to ground at the bottom plate - maybe that one was loose on your voyager?
Otherwise - a photo would probably solve your question.

JnGd
Posts: 80
Joined: Wed Apr 18, 2012 8:37 pm
Location: Île-Perrot

Re: Wire to nothing on voyager?

Post by JnGd » Sat Nov 06, 2021 9:51 pm

Hi paximof,

As soon as my synth comes back from maintenance, I will give you an update on that issue...

JnGd
Posts: 80
Joined: Wed Apr 18, 2012 8:37 pm
Location: Île-Perrot

Re: Wire to nothing on voyager?

Post by JnGd » Sun Nov 28, 2021 9:09 pm

Hi paximof,

That question has been asked no so long ago: Feb. 01 2021 and has never been answered yet...

Still, when my Voyager PE comes back from maintenace, i'll go check inside and give you and update...

But...as Doddos says...showing up a picture would help us and yourself !


Best regards...

JnGd
Posts: 80
Joined: Wed Apr 18, 2012 8:37 pm
Location: Île-Perrot

Re: Wire to nothing on voyager?

Post by JnGd » Tue Nov 30, 2021 4:12 pm

Hi paximof,

No "wire to nothing" inside the MOD & PITCH wheels circuits/compartment of my Voyager PE.

Regards

Post Reply