I have a voyager AE and recently got ahold of a VX-351 but with no output adaptor. Does anyone know where I could get one? Or perhaps there are workarounds for making the VX-351 work properly without one?
Thanks,
JGR
VX-351 Output Adaptor
-
- Posts: 12
- Joined: Tue Jan 19, 2016 4:59 pm
Re: VX-351 Output Adaptor
I sent my voyager to the moog factory and they installed one for me.
Re: VX-351 Output Adaptor
Installing the output adapter is not rocket science.
Here is a good page showing how to do it:
http://www.peff.com/synthesizers/moog/outputadapter/
And maybe the picture of the adapter tells a technician what these 4 resistor networks are for and how to built one, in case Moog does not sell them anymore.
Here is a good page showing how to do it:
http://www.peff.com/synthesizers/moog/outputadapter/
And maybe the picture of the adapter tells a technician what these 4 resistor networks are for and how to built one, in case Moog does not sell them anymore.
keep on turning these Moog knobs
Sequence:
Prodigy * minimoog '79 * Voyager * MF102 * MF103 * MF104z * MP201 * Taurus 3 * Minitaur * Sub Phatty * MF105 * Minimoog 2017+ MUSE * One 16
Sequence:
Prodigy * minimoog '79 * Voyager * MF102 * MF103 * MF104z * MP201 * Taurus 3 * Minitaur * Sub Phatty * MF105 * Minimoog 2017+ MUSE * One 16
-
- Posts: 354
- Joined: Wed Jul 30, 2003 6:46 pm
- Location: Springfield, VA
Re: VX-351 Output Adaptor
They’re current limit (protection) resistors so as not to damage your Voyager should you connect an output to the wrong place. The VX-351 will work without the adapter, but I wouldn’t recommend it.