Voyager + VX351 with Moogerfoogers and CP251

Tips and techniques for Minimoog Analog Synthesizers
Post Reply
Captainflint
Posts: 21
Joined: Sat Mar 14, 2015 10:58 am
Location: Leicester UK

Voyager + VX351 with Moogerfoogers and CP251

Post by Captainflint » Fri Dec 11, 2020 8:27 am

Hello Fellow Moogers,

I’ve recently purchased a Voyager with all the Moogerfoogers (all 7) / VX351 and CP251.
I’m new to this connecting CV and gates to the Voyager and was hoping for some helpful information and advice as to their connections.

I’ve tried to look on YouTube but without luck, there are plenty showing the results in sound demonstrations but I haven’t been able to find any regarding the actual connections and explanations to how it’s all controlled. I appreciate that one can have ‘happy accidents’ but with control voltages etc I’m weary of doing damage to my synth. I also have a few Moog foot expression pedals.

I have gone through the very short examples listed in the voyager manual but I haven’t progressed any further.

Are there any manuals or good informative books on the subject to purchase ?
Any help and guidance would be greatly appreciated thank you.

Many thanks
George

Markyboard
Posts: 354
Joined: Wed Jul 30, 2003 6:46 pm
Location: Springfield, VA

Re: Voyager + VX351 with Moogerfoogers and CP251

Post by Markyboard » Tue Dec 15, 2020 6:57 pm

I can’t help with reference material. But you need not worry about damage. Moog uses current limiting resistors on their outputs so everything is protected electronically. Still it’s good practice to only connect inputs to outputs and outputs to inputs.

Give it a try- you’ll be comfortable in no time.

Post Reply