Moog Voyager RME - Unable to update to v.3.5
Posted: Tue Nov 05, 2019 8:35 am
Dear all,
I'm trying to update my Voyager RME from version 3.0 to 3.5, after that all the presets got corrupted...presets with name such as 'n:01-j&%^"£Y"**(*&%£' .... but more worryingly is the fact that the majority of them produce no sound at all and very few presets only producing a continuous sound without even pressing any key on the keyboard.
So I downloaded the 'Voyager RME Firmware v3.5' from the Moog website and researched everything I could find online about this issue and followeded all the instructions on the 'voyager_3_5_release_notes' but still no luck!
On MASTER > Receive Presets > SysEx is enabled
The MIDI channel is set correctly. I tested it by sending some MIDI notes from a MIDI track in Pro Tools to the Voyager and I can see the MIDI LED next to the display flashing showing activity.
Also, from MIDI-OX I enabled the "Start or Stop Monitoring MIDI data" (Traffic Lights icon at the top of the window) and moving any pot on the Voyager shows activity on "Monitor Output" window as I can see all the MIDI events, which makes me think that there is communications between the MIDI-OX and the Voyager.
MIDI Device is set correctly, reconising my MIDI interface (M-Audio 4x4 Anniversary, with latest drivers installed).
On MIDI-OX > Configure > Input Buffers > Size 512 / Num 16 and Output Buffers > Size 128 / Num 16
Basically, I started loading the 'RME_bank_B_V3_5' and when I select Command Window > Send Sysex I can see the File Progress of the transfer on the MIDI-OX window BUT nothing is displayed on the Voyager display and the MIDI LED is not flashing - nothing happens !
The only other thing I'm not sure about is if the SysEx Device ID is set correctly? At the moment is number 88... I don't know if that can cause any problem, but I couldn't find any setting on MIDI-OX to check that it's sending the SysEx file to the correct MIDI device?
Any help would be much appreciated. Thanks in advance !
Simo
I'm trying to update my Voyager RME from version 3.0 to 3.5, after that all the presets got corrupted...presets with name such as 'n:01-j&%^"£Y"**(*&%£' .... but more worryingly is the fact that the majority of them produce no sound at all and very few presets only producing a continuous sound without even pressing any key on the keyboard.
So I downloaded the 'Voyager RME Firmware v3.5' from the Moog website and researched everything I could find online about this issue and followeded all the instructions on the 'voyager_3_5_release_notes' but still no luck!
On MASTER > Receive Presets > SysEx is enabled
The MIDI channel is set correctly. I tested it by sending some MIDI notes from a MIDI track in Pro Tools to the Voyager and I can see the MIDI LED next to the display flashing showing activity.
Also, from MIDI-OX I enabled the "Start or Stop Monitoring MIDI data" (Traffic Lights icon at the top of the window) and moving any pot on the Voyager shows activity on "Monitor Output" window as I can see all the MIDI events, which makes me think that there is communications between the MIDI-OX and the Voyager.
MIDI Device is set correctly, reconising my MIDI interface (M-Audio 4x4 Anniversary, with latest drivers installed).
On MIDI-OX > Configure > Input Buffers > Size 512 / Num 16 and Output Buffers > Size 128 / Num 16
Basically, I started loading the 'RME_bank_B_V3_5' and when I select Command Window > Send Sysex I can see the File Progress of the transfer on the MIDI-OX window BUT nothing is displayed on the Voyager display and the MIDI LED is not flashing - nothing happens !
The only other thing I'm not sure about is if the SysEx Device ID is set correctly? At the moment is number 88... I don't know if that can cause any problem, but I couldn't find any setting on MIDI-OX to check that it's sending the SysEx file to the correct MIDI device?
Any help would be much appreciated. Thanks in advance !
Simo