Click tracking on Vol Input

Tips and techniques for Minimoog Analog Synthesizers
Post Reply
Posts: 5
Joined: Thu Apr 12, 2012 6:10 pm

Click tracking on Vol Input

Post by Lindsay » Tue Apr 08, 2014 7:26 pm

Hello People,

I seem to be getting a click when using a 5V gate on the Vol input of my Voyager. It's only on that input. Am I making some stupid mistake?


User avatar
Posts: 712
Joined: Thu Mar 29, 2012 4:38 pm
Location: Seattle

Re: Click tracking on Vol Input

Post by Vsyevolod » Tue Apr 15, 2014 3:49 pm

The click is the sound of your Voyager going from zero sound to full on sound. This is how an analog circuit is supposed to work. Most of us would prefer to use an envelope generator to slow down that initial attack a bit.



User avatar
David Smyth
Posts: 294
Joined: Tue Jun 23, 2009 3:40 am
Location: Wellington, New Zealand

Re: Click tracking on Vol Input

Post by David Smyth » Tue Apr 15, 2014 8:20 pm

Also, a lag processor would work well for this application, to slope/slow the attack like an envelope generator, as Vsyevolod mentioned above.

Minimoog Voyager XL, Little Phatty Stage II + CV Output Mod, 2x Slim Phatty, Minitaur, MP-201, EP-2, 2x CP-251, MF-102, MF-104M, MF-107

Post Reply