Suitable cables for patching VX351 to Voyager?

Tips and techniques for Minimoog Analog Synthesizers
Post Reply
restlessboy
Posts: 59
Joined: Fri Aug 24, 2012 7:52 am
Location: Up a tree

Suitable cables for patching VX351 to Voyager?

Post by restlessboy » Tue Jan 29, 2013 11:18 am

Quick question as above. Would these do the trick?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0971508102
[Hosa CSS 890 BALANCED PATCH CABLES 3FT 8PCS. 1/4" TRS JACK TO 1/4" JACK.]

Would they also do for audio routing?

(PS - those who've been watching my saga, my Voyager is now in the same country as me, with the distro. Next stop - the shop. Then hopefully ME- :) ).

droner
Posts: 14
Joined: Sat Aug 04, 2012 11:52 pm

Re: Suitable cables for patching VX351 to Voyager?

Post by droner » Tue Jan 29, 2013 1:16 pm

No, you want to use unbalanced mono 1/4" cables for patching. You can buy sets of them pretty cheap online. I keep multi-colored ones so I remember what I've patched where!

restlessboy
Posts: 59
Joined: Fri Aug 24, 2012 7:52 am
Location: Up a tree

Re: Suitable cables for patching VX351 to Voyager?

Post by restlessboy » Tue Jan 29, 2013 6:33 pm

Thanks. Do they need to be TRS cables? Can you link to any?

User avatar
thealien666
Posts: 2791
Joined: Mon Nov 14, 2011 8:42 pm
Location: Quebec, Canada

Re: Suitable cables for patching VX351 to Voyager?

Post by thealien666 » Tue Jan 29, 2013 7:07 pm

Just to be clear, mono plugs are, by definition, not (T)ip (R)ing (S)leeve, but only (T)ip (S)leeve. Although TRS plugs can be wired as mono (by connecting the ring and sleeve together), they're not found pre-assembled like that on the market.

Commercial 1/4" cables are either stereo (balanced) with TRS plugs, or mono (unbalanced) with TS plugs.
Last edited by thealien666 on Tue Jan 29, 2013 7:23 pm, edited 1 time in total.
Moog Minimoog D (1975)
DSI OB6
DSI Prophet REV2
Oberheim Matrix-6
Ensoniq SQ-80
Korg DW8000
Behringer DeepMind 12
Alesis Ion

droner
Posts: 14
Joined: Sat Aug 04, 2012 11:52 pm

Re: Suitable cables for patching VX351 to Voyager?

Post by droner » Tue Jan 29, 2013 7:09 pm

They need to be TS cables (unbalanced mono), TRS are balanced stereo. These are what I use and they do just fine:

http://www.amazon.com/gp/aw/d/B001RF6CX ... 20&pi=SL75

User avatar
thealien666
Posts: 2791
Joined: Mon Nov 14, 2011 8:42 pm
Location: Quebec, Canada

Re: Suitable cables for patching VX351 to Voyager?

Post by thealien666 » Tue Jan 29, 2013 7:27 pm

Moog Minimoog D (1975)
DSI OB6
DSI Prophet REV2
Oberheim Matrix-6
Ensoniq SQ-80
Korg DW8000
Behringer DeepMind 12
Alesis Ion

restlessboy
Posts: 59
Joined: Fri Aug 24, 2012 7:52 am
Location: Up a tree

Re: Suitable cables for patching VX351 to Voyager?

Post by restlessboy » Tue Jan 29, 2013 7:35 pm

So these would do....?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0910352481

Just need to get from UK not US. Thanks again all!

User avatar
thealien666
Posts: 2791
Joined: Mon Nov 14, 2011 8:42 pm
Location: Quebec, Canada

Re: Suitable cables for patching VX351 to Voyager?

Post by thealien666 » Tue Jan 29, 2013 7:36 pm

Yes. And the price is right. But a bit short in length (you'll need to keep your VX351 close to your Voyager with only 45cm (1.5 feet))
Moog Minimoog D (1975)
DSI OB6
DSI Prophet REV2
Oberheim Matrix-6
Ensoniq SQ-80
Korg DW8000
Behringer DeepMind 12
Alesis Ion

restlessboy
Posts: 59
Joined: Fri Aug 24, 2012 7:52 am
Location: Up a tree

Re: Suitable cables for patching VX351 to Voyager?

Post by restlessboy » Wed Jan 30, 2013 3:10 pm

So maybe go for three feet?

User avatar
thealien666
Posts: 2791
Joined: Mon Nov 14, 2011 8:42 pm
Location: Quebec, Canada

Re: Suitable cables for patching VX351 to Voyager?

Post by thealien666 » Wed Jan 30, 2013 3:22 pm

Yes, unless you can position your VX351 near the top of your Voyager (that's where all the connectors are located on it) then 1.5f could be long enough...

Or unless you have a Voyager XL, then you can position the VX351 next to it on the left side and 1.5F long cables would also be long enough...

Otherwise, go for 3F.
Moog Minimoog D (1975)
DSI OB6
DSI Prophet REV2
Oberheim Matrix-6
Ensoniq SQ-80
Korg DW8000
Behringer DeepMind 12
Alesis Ion

restlessboy
Posts: 59
Joined: Fri Aug 24, 2012 7:52 am
Location: Up a tree

Re: Suitable cables for patching VX351 to Voyager?

Post by restlessboy » Wed Jan 30, 2013 4:29 pm

Okay, last one now.... These don't specify TS but they do say mono, so they'll do right?
http://www.ebay.co.uk/itm/Patch-Lead-Ca ... 1156836321

Thanks for all your help!

User avatar
thealien666
Posts: 2791
Joined: Mon Nov 14, 2011 8:42 pm
Location: Quebec, Canada

Re: Suitable cables for patching VX351 to Voyager?

Post by thealien666 » Wed Jan 30, 2013 4:37 pm

Yes indeed. You can tell they're mono by their visible TS only, in the picture.
Moog Minimoog D (1975)
DSI OB6
DSI Prophet REV2
Oberheim Matrix-6
Ensoniq SQ-80
Korg DW8000
Behringer DeepMind 12
Alesis Ion

User avatar
Vsyevolod
Posts: 712
Joined: Thu Mar 29, 2012 4:38 pm
Location: Seattle

Re: Suitable cables for patching VX351 to Voyager?

Post by Vsyevolod » Sat Feb 16, 2013 9:58 pm

Even though the TS cables are what's required, I just wanted to add that you CAN use TRS cables as well. The ring connection is just ignored. I do this all the time with my Foogers and Voyager.

Stephen




.

Post Reply