Finally pulled the trigger - 4 weeks out

Tips and techniques for Minimoog Analog Synthesizers
Post Reply
drumlager
Posts: 6
Joined: Fri Jan 27, 2012 10:18 am
Location: Fort Wayne, IN

Finally pulled the trigger - 4 weeks out

Post by drumlager » Fri Feb 10, 2012 9:54 am

After 10 years of using used analog gear, I have finally taken the jump into ....well...new analog gear. Called up Nova and they offered me an awesome deal on a voyager (walnut/blue) and a DSI Prophet. Luckily I will have a month to figure out the bells and whistles on the Prophet before the Voyager arrives.

My question is simple. While I have had years’ experience with synths and understand all the tweaks that are needed to change the sound, I am a complete noob when it comes to modular or even semi modular. In the next year, I would like to expand to the CV351 and possibly some foogers. Which is a good starting point when trying to expand the voyager out to satellite devices or feed it back to itself?

Also...what should I be sure NOT to do once I get the Voyager here?

This board has been a blast to read through and thanks for taking the time to read my dinky little post!

User avatar
Synthtron
Posts: 54
Joined: Mon Jan 30, 2012 9:06 pm
Location: Virginia, USA
Contact:

Re: Finally pulled the trigger - 4 weeks out

Post by Synthtron » Sun Feb 12, 2012 10:22 pm

I think getting the VX-351 may be a good place to start. I just got a Voyager Old School a couple weeks ago and am going to get the VX-351 so I can expand the CV outs then I will look to expand from there.
Juno-60 | JX-3p | Juno-106 | D-50 | D-5 | W-50 | JV-1080 | Fantom X6 | Jupiter-80 | Jupiter-50 | DX-7 | SY-35 | MX-49 | Timbre Wolf | Werkstatt-01
http://www.synthtron.com

User avatar
Omaroo
Posts: 147
Joined: Sat Apr 23, 2011 1:50 am
Location: Sydney, Australia

Re: Finally pulled the trigger - 4 weeks out

Post by Omaroo » Sun Feb 12, 2012 10:32 pm

Yep - I pick up my new EB tomorrow, and I've ordered the VX-351 as first cab off the rank along with the Voyager. Next step will be Foogers or Etherwave Pro.
Sub 37 Tribute, Waldorf Blofeld, MF-104M SD, Axiom 25, UMX-610, Propellerhead Balance, Truth B1030A mons, MacBook Pro i7, Live 9, Logic 10, Animoog.

User avatar
Portamental
Posts: 888
Joined: Fri Jan 23, 2009 8:53 am

Re: Finally pulled the trigger - 4 weeks out

Post by Portamental » Sun Feb 12, 2012 10:32 pm

Yes, the VX-351 is the place to start. The CP-251 contains some duplicate sections of the VX-351, and some new stuff as well. Nice to have too. The more jacks to plug into, the better. I have two of the CP-251's and I use them both a lot. An Etherwave Plus is also nice to have to use as a controller, a bit expensive used as a controller only , but you can feed its audio into external input of the Voyager, for more Moog sounds. It's also a great conversation piece.

EricK
Posts: 6010
Joined: Fri Apr 09, 2004 2:09 pm

Re: Finally pulled the trigger - 4 weeks out

Post by EricK » Sun Feb 12, 2012 10:40 pm

Nice combination! Welcome to the forum.

I think the RIngmod has a lot of potential for clangorous sounds, which can give you some odd spacey effects if that's what you are after. If I had one indespensable fooger it would be the delay. Though they don't make those anymore, a delay is the magic touch.

I love the guys at Nova! If they have what Im looking for, they get my business. They saved us thousands of dollars over the years.

All of the Foogers are neat, though I have no experience on the Flux.

The best addition I made to my Voyager besides the delay has to be the q119 sequencer. For something like that.

Eric
Support the Bob Moog Foundation:
https://moogfoundation.org/do-something-2/donate/

I think I hear the mothership coming.

c7sus
Posts: 468
Joined: Sun Aug 14, 2005 5:42 pm

Re: Finally pulled the trigger - 4 weeks out

Post by c7sus » Sun Feb 12, 2012 10:51 pm

Don't drop it or loan it out to ANYBODY.
Voyager EB #165, T3 #292, MF-101, 102, 103, 104SD, 2x104MSD, 105M, 107, 108M, MP-201, VX-351, CP-251, Frostwave Fat Controller.

Mr Shave
Posts: 168
Joined: Sat Sep 10, 2011 9:35 pm

Re: Finally pulled the trigger - 4 weeks out

Post by Mr Shave » Fri Feb 17, 2012 6:06 am

The Ring mod is probably my favorite. It took me a while to learn to use it because i thought it was a one trick pony. But you can get some amazing sounds from it without it sounding clangorous. To do that effectively, you really would need the outputs of the VX so you can take the pitch CV out of the VX to the freq CV of the ring mod. My second favorite is probably either the FB or the CF... They are both good for different reasons. The CF can add so much more warmth, and the FB can add more fuzz to put it gently.

User avatar
Omaroo
Posts: 147
Joined: Sat Apr 23, 2011 1:50 am
Location: Sydney, Australia

Re: Finally pulled the trigger - 4 weeks out

Post by Omaroo » Tue Mar 13, 2012 9:03 am

So, did your Voyager arrive? :?:
Sub 37 Tribute, Waldorf Blofeld, MF-104M SD, Axiom 25, UMX-610, Propellerhead Balance, Truth B1030A mons, MacBook Pro i7, Live 9, Logic 10, Animoog.

Post Reply