Moog Voyager Problems

Tips and techniques for Minimoog Analog Synthesizers
tthki
Posts: 2
Joined: Mon May 06, 2019 7:29 am

Re: Moog Voyager Problems

Post by tthki » Mon May 06, 2019 7:59 am

Hi,

I´ve run into some problems with my Voyager - there has been some prior issues when the whole instrument would go silent, some issues with the lcd screen and now the filter envelope is not triggering correctly. (There is a lag of varying length between the attack and decay stages, for example with both knobs at zero it now takes from 5-10 seconds for the envelope to close...) Same problems whether triggering with the keyboard or using an external gate. My serial number is 3091, so apparently Moog have stated that there is presumably some faulty parts. Synth purchased in Helsinki in 2011. Anybody with any advice? Is the person to contact still [email protected]?

Thanks in advance,

-Tuukka

Ledbetter
Posts: 188
Joined: Tue Jan 01, 2013 7:18 pm

Re: Moog Voyager Problems

Post by Ledbetter » Sun May 12, 2019 12:22 am

Yes, and he will authorize an RMA if your Voyager is in the serial number range. It is a Voyager Select, yes?

Good luck.
Former owner of Prodigy #2845 (purchased new, long ago), Animoog, Voyager Select (Fire & Maple), Little and Slim Phatties, Nord Electro 4D, 5D and Lead 2X, Roland AX-9.

tthki
Posts: 2
Joined: Mon May 06, 2019 7:29 am

Re: Moog Voyager Problems

Post by tthki » Mon May 13, 2019 6:59 am

Ok, thanks for the reply - I´ll try to get in touch with Andy! It´s a performer edition...

-T

Post Reply