Global settings issues - Local Control & Sequence Keyboard control

Mother-32, DFAM, Subharmonicon, Grandmother, Matriarch
Post Reply
Dazzjazz
Posts: 7
Joined: Wed Dec 01, 2021 8:29 pm

Global settings issues - Local Control & Sequence Keyboard control

Post by Dazzjazz » Thu Jan 12, 2023 2:25 am

Hi,

I'm having trouble getting the Matriarch to change the settings of
1.8 Local Control (Arp/Seq) and
2.5 Sequence Keyboard Control

I'm quite familiar with using the Global settings, and to double check it was working at all, I was able to change the pitch bend range successfully.

I must have tried 50 time today to get the Matriarch sending the sequence out via MIDI, leaving the internal synth to be played live, to no avail.

Am I doing something wrong or is this a known bug?

Darren

Drumpilot
Posts: 1
Joined: Tue Dec 21, 2021 12:49 am

Re: Global settings issues - Local Control & Sequence Keyboard control

Post by Drumpilot » Thu Mar 16, 2023 8:34 pm

Not sure if this helps, but I had to also turn 2.3 Arp/Seq MIDI Output to ON to get the MIDI notes from the Arp/Seq to go out through MIDI. The default is ON, but I had disabled it in the past. So, with 1.8 OFF, 2.5 OFF and 2.3 ON, you should be able to press PLAY on the Matriarch and the MIDI notes of the Sequence will start going out, and the keyboard can be played independently.

Post Reply