Subharmonicon - weird VCO 1 & 2 link behaviour when using CVs

Mother-32, DFAM, Subharmonicon, Grandmother, Matriarch
Post Reply
Subaphonic
Posts: 3
Joined: Mon Apr 26, 2021 7:34 pm

Subharmonicon - weird VCO 1 & 2 link behaviour when using CVs

Post by Subaphonic » Tue Jun 28, 2022 6:42 pm

Hi,
I've bought a midi controller that sends CVs to control the pitch of my VCOs.
When I plug a cable in the "VCO 1" input in order to change the pitch, it also changes the pitch of VCO 2 - not the opposite though, only 1 changes 2.
It's a bit disappointing, since I thought I could be using 2 different vcos with my midi controller to trigger independant melodies and rhythms.
Has anyone encountered this issue ? If that's not normal, could it come from the update ?

Thanks

User avatar
MRNUTTY
Posts: 319
Joined: Fri May 02, 2014 2:54 pm

Re: Subharmonicon - weird VCO 1 & 2 link behaviour when using CVs

Post by MRNUTTY » Fri Jul 08, 2022 9:12 pm

block diagram in the manual shows the VCO2 CV IN is normalized to VCO1 CV IN.

tbh, i don't see what your problem is.
VoyagerEB, Minitaur, LittlePhattyII, 4xSlimPhatty, Sub37, MF[2x101,2x102,103,104M,105,105B,105M,2x107,108M], 3xCP251, XV351, MP201;
2xMother 32, DFAM, Subharmonicon;
System 55 and Minimoog clones with lots of mods.

User avatar
stiiiiiiive
Posts: 2534
Joined: Tue Aug 30, 2011 2:58 pm
Contact:

Re: Subharmonicon - weird VCO 1 & 2 link behaviour when using CVs

Post by stiiiiiiive » Sun Jul 10, 2022 5:48 am

Hi !

Same remark here: you have the option of using two separate CVs or to use one for both oscillators.

The point you might be missing is that you can do this with CVs only, not MIDI.

Post Reply