Matriarch: help using "Clock In" with my teenage engineering po-12

Mother-32, DFAM, Subharmonicon, Grandmother, Matriarch
Post Reply
dr_slurp
Posts: 1
Joined: Sun Jan 16, 2022 6:41 pm

Matriarch: help using "Clock In" with my teenage engineering po-12

Post by dr_slurp » Sun Jan 16, 2022 6:45 pm

I'm trying to have my matriarch's sequencer tempo controlled by the sync tempo out from my teenage engineering po-12. I've already put the po-12 into sync mode 1, so that the tip are the sync signals. I've confirmed that the po-12 is outputting signals by plugging it into my interface (it has a click for every eighth note).

I plug the tip into a 1/2 to 1/8 inch mono adapter. Plug that into the "clock in" on the back of the matriarch. I have a sequence recorded. Push play / hold buttons. Then go to hit a key (any key) and the sequence doesn't start. The drum machine is playing along. I get no blinks on the LED below the rate/div knob.

Any hints for driving the matriarch with an external clock?

I know it should be possible, as I have seen this video. just don't know his exact patches...


https://www.reddit.com/r/synthesizers/c ... ilter_and/

Post Reply