Arp/seq, Round robin

Mother-32, DFAM, Subharmonicon, Grandmother, Matriarch
Post Reply
Sebastiangarst
Posts: 15
Joined: Thu Dec 09, 2021 7:20 pm

Arp/seq, Round robin

Post by Sebastiangarst » Sat Dec 25, 2021 8:05 am

Hi.

I just get confused from doing these patch examples from pathcbooks from moogs website,
where they showing diffrent settings on oscillators 1,2,3,4. It reads - use the arp, (no info about round robin mode, so i would think it should be default, ON with reset.

Arp running, only hearing osc 1.

What im a missing? Is there another global setting for the arp/seq to do the trick of taking action on the osc 2,3,4 when in round robin mode On with reset??

I know i can set the global setting "round robin ON"
But im not seing that in a lot of patches from the patch book, and i start wondering if there are more possible ways of getting there.

Also i could use external arp/seq via midi and make long notes so they overlap,

I hope that somebody will help me be less confused

nezzyidy
Posts: 31
Joined: Mon Dec 30, 2013 5:34 pm

Re: Arp/seq, Round robin

Post by nezzyidy » Tue Feb 08, 2022 9:12 pm

The patch sheet is wrong. If you want to cycle through oscillators with an arp, that’s what round robin (no reset) is for.

Sebastiangarst
Posts: 15
Joined: Thu Dec 09, 2021 7:20 pm

Re: Arp/seq, Round robin

Post by Sebastiangarst » Sun Feb 13, 2022 6:24 am

Yes it seems like it.
But then at least 10 patch sheets, official release on moog website, is wrong.

And i just cant get my mind around how people use the instrument without
round Robin mode i on.

If round Robin is off. (Or the ON with reset)
=
You Will never hear osc 2,3,4 if you
Play the arp/seq with Paraphonic mode 2 and 4.

Is that really so?

Does everyone has round Robin mode ON always? Like me





Only osc is what

nezzyidy
Posts: 31
Joined: Mon Dec 30, 2013 5:34 pm

Re: Arp/seq, Round robin

Post by nezzyidy » Mon Feb 14, 2022 12:30 am

That’s not exactly how I’d put it. The arp and sequencer behave differently. The sequencer can play multiple Osc’s in para modes - just not the arp.

Post Reply