Hi,
When I sync the Korg Volca Drum to the DFAM, I can hear the clock pulse coming through in the audio when VCA EG is set to Fast.
Anyone else had this issue?
DFAM audible click noise
DFAM audible click noise
Subsequent 37, DFAM, Prophet Rev2, Lyra-8, SH-01A, Korg Volca Drum
Re: DFAM audible click noise
Hi I am having the same issue did you manage to find a solution?
-
- Posts: 29
- Joined: Tue Sep 07, 2021 8:41 am
Re: DFAM audible click noise
What do you connect the sync-out to?
Running the sync-out of my Monologue into the DFAM's ADV/CLOCK input doesn't give clicks in the audio, whatever the VGA-EG is set to.
Running the sync-out of my Monologue into the DFAM's ADV/CLOCK input doesn't give clicks in the audio, whatever the VGA-EG is set to.
Re: DFAM audible click noise
Hello, first post here....I'm really struggling with this.
I sync DFAM using Mother32 as suggested in the manual, sending Clock from assignable output to Adv/Clock input, but I get this click sound at the offset stage of DFAM sound (a kick in this case).
Are there any ways to avoid this issue? (I do not have a Monologue...)
Thanks in advance for any insights!
d^_^b
I sync DFAM using Mother32 as suggested in the manual, sending Clock from assignable output to Adv/Clock input, but I get this click sound at the offset stage of DFAM sound (a kick in this case).
Are there any ways to avoid this issue? (I do not have a Monologue...)
Thanks in advance for any insights!
d^_^b
-
- Posts: 29
- Joined: Tue Sep 07, 2021 8:41 am
Re: DFAM audible click noise
There should be no bleeding from Adv/Clock input to the VCA-EG. Is the click also there if you manually trigger the DFAM at the same speed? If so, then maybe try setting VCA-EG to slow helps.