Matriarch Firmware Broke the Sequencer

Mother-32, DFAM, Subharmonicon, Grandmother, Matriarch
Post Reply
matriarchy
Posts: 4
Joined: Wed Jan 08, 2020 9:12 pm

Matriarch Firmware Broke the Sequencer

Post by matriarchy » Wed Jan 08, 2020 9:20 pm

Just updated to 1.1 successfully (it rebooted), and now the sequencer will not play two of the same note in succession. It just rests on the second occurrence. Anyone else have this issue?

Does anyone know if I can reinstall the old firmware?

matriarchy
Posts: 4
Joined: Wed Jan 08, 2020 9:12 pm

Re: Matriarch Firmware Broke the Sequencer

Post by matriarchy » Thu Jan 09, 2020 4:13 pm

Solved-ish. There is a bug (at least for me) in the new firmware that exhibits the behavior I described, but only if the global settings are set to disengage keyboard seq control (seq plays back immediately on hitting Play, as entered). I rolled back to the old firmware thanks to Moog support's fast response, and it's fine in both modes now.

User avatar
misterpete
Posts: 390
Joined: Wed Oct 26, 2011 9:16 am

Re: Matriarch Firmware Broke the Sequencer

Post by misterpete » Sun Jan 12, 2020 3:25 pm

I saw the same issue but reinstalling the NEW firmware corrected it back to the default behaviour— meanwhile still having trouble with GLOBAL SETTINGS and the sequencer as reported in the oithe thread ¯\_(ツ)_/¯
Please Call Me, PETE
https://petedako.bandcamp.com/music
"Mr. Pete" at MuffWiggler |@petedako on Twitter

Post Reply