Matriarch delay mix issue

Mother-32, DFAM, Subharmonicon, Grandmother, Matriarch
Post Reply
robak84
Posts: 10
Joined: Wed Feb 03, 2016 6:25 pm

Matriarch delay mix issue

Post by robak84 » Sat Nov 09, 2019 6:59 am

Hi, guys!
Matriarch delay issue here. When I turn the delay mix knob fully counter-clockwise the delay is still present. It's barely audible but it's still there. It's especially annoying when the feedback knob is turned up. Have you guys encountered that behaviour?
Top
OlleOlle
Posts: 8
Joined: Fri Jan 04, 2019 3:33 pm

Re: Matriarch delay mix issue

Post by OlleOlle » Thu Nov 28, 2019 4:50 pm

Just got mine and it's the same. It's very low though. You really have to crank the volume up to notice.
Top
User avatar
_DemonDan_
Posts: 1273
Joined: Mon Nov 16, 2009 4:52 pm

Re: Matriarch delay mix issue

Post by _DemonDan_ » Fri Nov 29, 2019 2:44 pm

You could just put unconnected cables into the STEREO DELAY INPUT 1 and INPUT 2 jacks, thus bypassing any input into the two delays.
_ :twisted: _DemonDan_ :twisted: _
Top
robak84
Posts: 10
Joined: Wed Feb 03, 2016 6:25 pm

Re: Matriarch delay mix issue

Post by robak84 » Wed Dec 04, 2019 1:18 pm

Yes, it should work, but it's a workaround. I'm curious if the issue could be resolved by somehow calibrating the pot.
Top
DylanPhillips
Posts: 1
Joined: Sat Apr 18, 2020 7:45 pm

Re: Matriarch delay mix issue

Post by DylanPhillips » Sat Apr 18, 2020 7:46 pm

Hi, did you manage to fix this issue?
Top
Post Reply

Return to “Moog Semi-Modular Analog Synthesizers”