Hello everyone! Two weeks ago I’ve played a gig on my synth and everything’s gone fine like usual! After show I’ve put grandma to box and went for holidays. Yesterday when I’ve try to play on it I was surprised that synth not giving any sounds. After couple hours of digging I know this…
MIDI signal form Grandmother keyboard is sending to computer
MIDI signal from computer to Grandmother work fine and grandma giving a sound
VCO MODE switch work only I drone mode and then OSC start play lowest frequency is possible (clicing)
I can’t play using grandma keyboard, mod and pitch wheel also not work properly.
Is anyone have similar issue, my first suspension is VCO MODE switch.
Thanks for help
Problem with Grandmother
Re: Problem with Grandmother
I suppose by VCO MODE SWITCH you mean VCA <- A!
MODE switch?
If the MIDI OUT reacts correctly to the three different positions of this switch, this control cannot be the problem cause.
First I would check if it got some mismatch in the internal memory regarding local note on/off. Global settings D#2 + G0 (see manual).
MODE switch?
If the MIDI OUT reacts correctly to the three different positions of this switch, this control cannot be the problem cause.
First I would check if it got some mismatch in the internal memory regarding local note on/off. Global settings D#2 + G0 (see manual).
keys: CX-3 II, GRANDMOTHER, streichfett, ZEN DELAY