MOOG 15 emvelope problems

System 55 • System 35 • Model 15
Post Reply
elcatllar
Posts: 18
Joined: Mon Jul 04, 2016 2:36 pm

MOOG 15 emvelope problems

Post by elcatllar » Thu Dec 08, 2016 6:31 pm

Finally I got yesterday my Moog keyboard.
Today when I have start to patch the 15, I have realize that the envelopes are not working (?).
After making some test : I have discover that ONLY the SECOND row of the controller outputs is working fine ( the 1º and 3º row not!!!).
Some suggestions before looking to found a tech..... (Grrrrrrr!!!!).
I will apreciate your comments
Kind regards

Rarecomponentadsr
Posts: 99
Joined: Mon Aug 24, 2015 5:08 pm
Location: Derbyshire England

Re: MOOG 15 emvelope problems

Post by Rarecomponentadsr » Wed Dec 21, 2016 8:46 am

Check your power connections to the 911's and also check the Gate connections both from your keyboard and your 911's ...try shorting the Gate connections at the 911 with a screwdriver to make sure everything there is correct.
If they don't trigger it will be a power connection problem.

Post Reply