Integrated mods

Everything Werkstatt.
Post Reply
ayacombe
Posts: 4
Joined: Fri Feb 03, 2017 2:32 pm

Integrated mods

Post by ayacombe » Tue Feb 14, 2017 2:32 pm

Hi

Had my Werkstatt for half a year, and I absolutely love it.
I am a bit of a noob regarding mods, but I have installed a custom pcb with VCO CV, VCF CV and GATE IN, which works great.

Now I want to make some more mods, more specifically:

I would like to have these mods integrated in my Werkstatt, instead of having these breadboards and/or boxes connected.
Where do I start?

Best
A

nathanscribe
Posts: 58
Joined: Sat May 10, 2008 12:40 pm

Re: Integrated mods

Post by nathanscribe » Sat Feb 25, 2017 9:53 am

First of all, I'd say use the area of the Werkstatt PCB with the free holes as much as you can. Any flying wires from there can go to the appropriate sockets, pots, whatever. Drill holes where you want them for your controls and i/o. Pretty straight forward, really. 8)

Life has got in the way of synthing lately, but I'm back on with the Werkstatt mods now (blog link in signature). It's a great little machine for tinkering with!

bwob
Posts: 3
Joined: Fri Jun 16, 2017 4:43 am

Re: Integrated mods

Post by bwob » Fri Jun 16, 2017 4:57 am

hi Ayacombe, did you managed to get the 555IC 2nd oscillator from the werkstatt website working? as for me... nothing is coming out following the instructions as they are.

Post Reply