Moog Music Forum

Share Ideas and Pass the word

Kenton Pro Solo with Werkstatt

Everything Werkstatt.

Kenton Pro Solo with Werkstatt

Postby RizalKhan » Fri Jan 30, 2015 11:57 pm

Hey guys

Before you guys read this, please understand that my knowledge on CV is zero.

What I am trying to achieve is to be able to sequence Midi notes via Cubase to the Werkstatt that has the expendion board installed and a Kenton Midi CV convertor.

Before I try anything, can I assume

Cubase Midi out to Midi in of Kenton.
Kenton CV to CV in of Werkstatt
Kenton Gate to Gate out of Werkstatt (I read the gate works as in and out? )

Is this how you do it?

Posts: 36
Joined: Thu Sep 11, 2008 6:01 pm

Re: Kenton Pro Solo with Werkstatt

Postby toryjames » Wed Jan 04, 2017 1:29 am

I have a Werkstatt and a Kenton Pro-Solo and have not had success with the Kenton's trigger being strong enough for the Werkstatt. The Korg SQ-1 sequencer does not trigger the gate on the Werkstatt either. The Arturia Beatstep Pro and Keystep do successfully open the Werkstatt's gate. Yes, you have it set up correctly but the gate out from the Kenton will likely not be strong enough.
Posts: 142
Joined: Tue Jan 16, 2007 4:21 am
Location: California

Re: Kenton Pro Solo with Werkstatt

Postby nathanscribe » Sat Jan 14, 2017 12:17 pm

Yeah, the Werkstatt as it comes from the factory does not have a proper Gate input sadly, which is why I designed a modification that provides one (linky link). You do need basic DIY skills to make that mod, though. There's also Laurentide's take on the circuit, which is different to mine. I've not seen any other true gate input for the Werkstatt, ecxept some dude on eBay who was selling a PCB that looked suspiciously like my circuit...
Posts: 53
Joined: Sat May 10, 2008 12:40 pm

Return to Werkstatt Forum

Who is online

Users browsing this forum: CommonCrawl [Bot] and 0 guests