MF Drive - Amperage

Welcome to the world of Minifooger Analog Effects
Post Reply
signals_
Posts: 4
Joined: Sat Jan 07, 2017 6:20 pm

MF Drive - Amperage

Post by signals_ » Sat Jan 07, 2017 6:25 pm

Hi,

What's the max amperage the MF Drive can handle? The web states 10mA; most bricks are around 500mA. Your help would be greatly appreciated.

signals_

User avatar
_DemonDan_
Posts: 1244
Joined: Mon Nov 16, 2009 4:52 pm

Re: MF Drive - Amperage

Post by _DemonDan_ » Mon Jan 09, 2017 11:36 am

signals_ wrote:What's the max amperage the MF Drive can handle?
The web states 10mA; most bricks are around 500mA.

Hi signals_,

I'm not an EE expert, but my understanding is that a device only pulls the amperage that it needs, regardless of how much is available. So it is only important that your power supply's amperage is rated higher than what you need.

I have many power supplies rated much higher than what the devices need.

EEs, please chime in if I'm wrong on this....
_ :twisted: _DemonDan_ :twisted: _

signals_
Posts: 4
Joined: Sat Jan 07, 2017 6:20 pm

Re: MF Drive - Amperage

Post by signals_ » Mon Jan 09, 2017 12:44 pm

Thanks for the response, Dan. I suspect you are correct but wanted to check to see if there were any quirks with the MF Drive. I'm no EE expert either :)

User avatar
stiiiiiiive
Posts: 2238
Joined: Tue Aug 30, 2011 2:58 pm
Contact:

Re: MF Drive - Amperage

Post by stiiiiiiive » Mon Jan 09, 2017 3:57 pm

Not EE neither, but I second that :)

User avatar
Gladmarr
Posts: 141
Joined: Fri Aug 27, 2010 7:47 pm

Re: MF Drive - Amperage

Post by Gladmarr » Wed Jan 11, 2017 12:22 am

_DemonDan_ wrote:
signals_ wrote:What's the max amperage the MF Drive can handle?
The web states 10mA; most bricks are around 500mA.

Hi signals_,

I'm not an EE expert, but my understanding is that a device only pulls the amperage that it needs, regardless of how much is available. So it is only important that your power supply's amperage is rated higher than what you need.

I have many power supplies rated much higher than what the devices need.

EEs, please chime in if I'm wrong on this....


I'm an EE, and you are correct about that. Unless the pedal breaks and draws more that the usual amount of current. But at that point all bets are off.
Image

Post Reply