Minifooger delay, light off wont turn on

Welcome to the world of Minifooger Analog Effects
Post Reply
phil.long
Posts: 4
Joined: Sun Dec 28, 2014 5:02 pm

Minifooger delay, light off wont turn on

Post by phil.long » Sun Dec 28, 2014 5:11 pm

The unit was working fine, it slipped and touched off a mixing desk.
possibly shorted off the case of the desk which is going to ground.

it's working grand when signal is bypass, but when i try to switch it on
the light is off and none of the signal is making it through.

any help would be much appreciatedthanks

User avatar
Gladmarr
Posts: 141
Joined: Fri Aug 27, 2010 7:47 pm

Re: Minifooger delay, light off wont turn on

Post by Gladmarr » Sun Dec 28, 2014 5:55 pm

If you haven't already, check the battery. It's probably either dead or dislodged inside the case.
Image

phil.long
Posts: 4
Joined: Sun Dec 28, 2014 5:02 pm

Re: Minifooger delay, light off wont turn on

Post by phil.long » Mon Dec 29, 2014 7:12 am

Yea tried this and still nothing

User avatar
Gladmarr
Posts: 141
Joined: Fri Aug 27, 2010 7:47 pm

Re: Minifooger delay, light off wont turn on

Post by Gladmarr » Mon Dec 29, 2014 12:11 pm

That's no good.

When you said it touched off the edge of a mixing desk, are you saying you dropped it, or just touched it to the edge of the mixer? If you dropped it, something inside could've gotten dislodged. Isn't there a ribbon cable attached to the switch? Maybe that has become unseated. If it was an electrical zap, then you may be seriously out of luck.

If it's new enough, you should just contact Moog customer service.
Image

phil.long
Posts: 4
Joined: Sun Dec 28, 2014 5:02 pm

Re: Minifooger delay, light off wont turn on

Post by phil.long » Mon Dec 29, 2014 2:47 pm

Gladmarr wrote:That's no good.

When you said it touched off the edge of a mixing desk, are you saying you dropped it, or just touched it to the edge of the mixer? If you dropped it, something inside could've gotten dislodged. Isn't there a ribbon cable attached to the switch? Maybe that has become unseated. If it was an electrical zap, then you may be seriously out of luck.

If it's new enough, you should just contact Moog customer service.
the ribbon is still attached to the switch, yea it just touched off the side of the mixer, then wouldnt turn back on again

phil.long
Posts: 4
Joined: Sun Dec 28, 2014 5:02 pm

Re: Minifooger delay, light off wont turn on

Post by phil.long » Tue Dec 30, 2014 5:57 am

Gladmarr wrote:That's no good.

When you said it touched off the edge of a mixing desk, are you saying you dropped it, or just touched it to the edge of the mixer? If you dropped it, something inside could've gotten dislodged. Isn't there a ribbon cable attached to the switch? Maybe that has become unseated. If it was an electrical zap, then you may be seriously out of luck.

If it's new enough, you should just contact Moog customer service.
Yea everything looks fine inside it alright, the ribbon is in the same position attached to the switch

User avatar
bichuelo
Posts: 862
Joined: Fri Jan 22, 2010 5:25 pm
Location: Bogotá, Colombia
Contact:

Re: Minifooger delay, light off wont turn on

Post by bichuelo » Tue Dec 30, 2014 12:43 pm

Have you asked Moog for help yet?

[email protected]
http://audiotecna.info
T-III, Voyager, VX-351, Slim Phatty, Model D, Sub Phatty, Subsequent 37, Minitaur, all moogerfoogers and minifoogers, EW+, Theremini, Model 15, Filtatron, Animoog, Model D App, iOS 11 Mother-32, DFAM, Werkstatt, Win7, High Sierra

Post Reply