MF103 DIY

Welcome to the world of Minifooger Analog Effects
Post Reply
User avatar
Herr Mosa
Posts: 7
Joined: Sat May 11, 2019 9:04 am
Location: Offenburg, Germany
Contact:

MF103 DIY

Post by Herr Mosa » Sat Sep 05, 2020 9:19 am

I was able to get hold of one of the last MF103 Phaser two years ago. However, it had sporty dropouts accompanied by a loud humming. Today I finally removed the circuit board:
IMG_9749.JPG
Unfortunately the ground connection to the 2nd row of sockets was not soldered on the board side. This was probably a careless mistake which can happen in the handicraft production of these little darlings. This one pin was quickly soldered.

Because of my farsightedness these are really lucky circumstances, because he saves me the repair shipment or - God forbid - even soldering on SMD components ;)

IMG_9750.JPG

User avatar
stiiiiiiive
Posts: 2305
Joined: Tue Aug 30, 2011 2:58 pm
Contact:

Re: MF103 DIY

Post by stiiiiiiive » Tue Sep 22, 2020 12:42 pm

Congrats! So is it working now?

User avatar
Herr Mosa
Posts: 7
Joined: Sat May 11, 2019 9:04 am
Location: Offenburg, Germany
Contact:

Re: MF103 DIY

Post by Herr Mosa » Thu Oct 01, 2020 1:18 am

stiiiiiiive wrote: Tue Sep 22, 2020 12:42 pm Congrats! So is it working now?
yep, all fine, thank you.
(besides the fact that I posted in the wrong category :wink:)

User avatar
stiiiiiiive
Posts: 2305
Joined: Tue Aug 30, 2011 2:58 pm
Contact:

Re: MF103 DIY

Post by stiiiiiiive » Thu Oct 01, 2020 10:23 am

Haha cool! :)

Post Reply