Animoog Timbres Grid

Share Model D, Model 15, Animoog and Filtatron tips and tricks. Unleash your creations on the world.
Post Reply
V01t
Posts: 1
Joined: Tue Oct 18, 2011 7:44 pm

Animoog Timbres Grid

Post by V01t » Tue Oct 18, 2011 8:04 pm

It took a while, but I think I figured out the X/Y grid. You have over 50 different timbres to choose from and you assign a timbre to 8 different horizontal zones. The zones crossfade in the up/down direction depending where you cursor is.

Image

The parameters of the timbre are tweeked by swiping left to right. Here the SupaPhasor timbre is having it's Phasor frequency changed.

Image

Use the TIMBRES tab and touch the zone you want to change, then choose a timbre from the list...

Image

I hope this helps, here's some more information http://www.bobborries.com/Tutorials/AnimoogTutorial.html

User avatar
drcarver
Posts: 114
Joined: Wed Oct 21, 2009 4:18 pm

Re: Animoog Timbres Grid

Post by drcarver » Wed Oct 19, 2011 12:06 pm

Nice tutorial...It took me a little while to figure that stuff out for myself. This should help folks tremendously. :D
New album available!

http://www.cdbaby.com/cd/chriscarver

User avatar
analoghaze
Posts: 527
Joined: Wed Nov 02, 2005 9:31 pm
Location: analog paradise
Contact:

Re: Animoog Timbres Grid

Post by analoghaze » Wed Oct 19, 2011 7:19 pm

Thanks.
Nice site.
Welcome to the forum.
:D
Music can Name the Unnamable and Communicate the Unknowable.

'I am... everything is... changed... they're calling... your face... interwoven... who is...' Patient mumbles inaudibly to a tune (sounds like 'Thanks for the memory).

Newstech
Posts: 39
Joined: Tue Oct 18, 2011 6:28 pm
Location: Baltimore, MD

Re: Animoog Timbres Grid

Post by Newstech » Wed Oct 19, 2011 7:39 pm

That makes sense. I think my problem was seeing timbres as samples, but they're more than that.

Post Reply